_PM.Common.Cancel=Cancel
_PM.Common.Close=Close
_PM.Common.Configure=Configure
_PM.Common.Continue=Continue
_PM.Common.Delete=Delete
_PM.Common.Description=Description
_PM.Common.Draft=Draft
_PM.Common.Edit=Edit
_PM.Common.Email=Email
_PM.Common.Error=Error
_PM.Common.Event=Event
_PM.Common.Finish=Finish
_PM.Common.Hidden=Hidden
_PM.Common.Import=Import
_PM.Common.Message=Message
_PM.Common.Multiple=Multiple
_PM.Common.Name=Name
_PM.Common.New=New
_PM.Common.No=No
_PM.Common.OK=OK
_PM.Common.Operator=Operator
_PM.Common.Order=Order
_PM.Common.Open=Open
_PM.Common.OpenTheExpressionEditor=Open the Expression Editor
_PM.Common.Parameter=Parameter
_PM.Common.PleaseWait=Please Wait
_PM.Common.Plugin=Plug-in
_PM.Common.ProcessModel=Process Model
_PM.Common.ProcessModeler=Process Modeler
_PM.Common.QuickTask=Quick Task
_PM.Common.Remove=Remove
_PM.Common.Required=Required
_PM.Common.Result=Result
_PM.Common.Save=Save
_PM.Common.Setup=Setup
_PM.Common.Start=Start
_PM.Common.Type=Type
_PM.Common.Value=Value
_PM.Common.Yes=Yes

_PM.Context.Above=Above
_PM.Context.Above.##CONTEXT##=Whether a label should be displayed "above" the input component.  The alternatives would be "adjacent" or "hidden"
_PM.Context.AddLabel=Add Label
_PM.Context.AddLane=Add Lane
_PM.Context.AllEvents=All Events
_PM.Context.Below=Below
_PM.Context.Below.##CONTEXT##=This refers to the position of lanes to place within a process model view. It would either be to place the new lane below or to the right
_PM.Context.Copy=Copy
_PM.Context.Cut=Cut
_PM.Context.DeleteLane=Delete Lane
_PM.Context.DisableActivityChaining=Disable Activity Chaining
_PM.Context.EditForm=Edit Form
_PM.Context.EditStartProcessModel=Edit Start Process Model
_PM.Context.EditSubProcessModel=Edit Sub-Process Model
_PM.Context.EnableActivityChaining=Enable Activity Chaining
_PM.Context.EscalationProperties=Escalation Properties
_PM.Context.Forms=Forms
_PM.Context.Instances=Instances
_PM.Context.Left=Left
_PM.Context.LaneProperties=Lane Properties
_PM.Context.MonitorSubProcess=Monitor Sub-Process
_PM.Context.MonitorSubProcess.##CONTEXT##=Monitor is a verb in this context
_PM.Context.MoveLane=Move Lane
_PM.Context.NoSmartServicesFound=No results found
_PM.Context.Paste=Paste
_PM.Context.Properties=Properties
_PM.Context.Recommendations=Recommendations
_PM.Context.RemoveEscalations=Remove Escalations
_PM.Context.Right=Right
_PM.Context.SearchForSmartServices=Search for smart services
_PM.Context.Search=Search
_PM.Context.SmartServices=Smart Services
_PM.Context.Integrations=Integrations
_PM.Context.Interfaces=Interfaces
_PM.Context.ProcessModels=Process Models
_PM.Context.UnknownDesignObjects=Unknown Design Objects
_PM.Context.Suggested=Suggested
_PM.Context.ViewForm=View Form
_PM.Context.ViewSubProcess=View Sub-Process

_PM.Data.ExpressionProperties=Expression Properties
_PM.Data.NoCustomOutputsHaveBeenConfigured=No Custom Outputs have been configured
_PM.Data.ResultProperties=Result Properties
_PM.Data.SubmissionLocation=Submission Location
_PM.Data.ThereAreNoResultsToConfigure=There are no results to configure

_PM.Decision.Condition=Condition
_PM.Decision.Conditions=Conditions
_PM.Decision.DefineAndOrder=Define and Order
_PM.Decision.ExecuteAllOutgoingPathsAtTheSameTime=Execute all outgoing paths at the same time
_PM.Decision.Execute1OrMoreOutgoingPaths=Execute 1 or more outgoing path(s)
_PM.Decision.ExecuteOnly1OutgoingPath=Execute only 1 outgoing path
_PM.Decision.ElseIfNoRulesAreTRUE=Else if no rules are TRUE
_PM.Decision.Flows=Flows
_PM.Decision.GoTo=go to
_PM.Decision.GoTo.##CONTEXT##=Used to describe a connection between two nodes in a Process Model, the process flow will "go to" a target node from the current node.
_PM.Decision.IncomingPathsToArriveBeforeExecuting=incoming path(s) to arrive before executing
_PM.Decision.IncomingPathsToArriveBeforeExecuting.##CONTEXT##=This appears directly after a string "Require {0} of {1}"
_PM.Decision.IfNoneOfTheAboveRulesAreTRUE=If none of the above rules are TRUE
_PM.Decision.IncomingPaths=Incoming Path(s)
_PM.Decision.MoveUp=Move Up
_PM.Decision.MoveDown=Move Down
_PM.Decision.NoFurtherConfigurationNecessaryForANDGateway=No further configuration necessary for AND gateway.
_PM.Decision.Of=of
_PM.Decision.OneOrMorePathsCanEndInAComplexGateway=1 or more paths can end in a Complex gateway
_PM.Decision.OneOrMorePathsCanExitAComplexGateway=1 or more paths can exit a Complex gateway
_PM.Decision.OneOrMorePathsCanEnterAnANDGateway=1 or more paths can enter an AND gateway
_PM.Decision.OneOrMorePathsCanExitAnANDGateway=1 or more paths can exit an AND gateway
_PM.Decision.OneOrMorePathsCanEnterAnORGateway=1 or more paths can enter an OR gateway
_PM.Decision.OneOrMorePathsCanExitAnORGateway=1 or more paths can exit an OR gateway
_PM.Decision.OneOrMorePathsCanEnterAnXORGateway=1 or more paths can enter an XOR gateway
_PM.Decision.OneOrMorePathsCanExitAnXORGateway=1 or more paths can exit an XOR gateway, but only ONE gets executed
_PM.Decision.OutgoingPaths=Outgoing Paths
_PM.Decision.PathLabel=Path Label
_PM.Decision.RemoveThisRule=Remove this rule
_PM.Decision.Require=Require
_PM.Decision.RequireTheseSpecificNodePaths=Require these specific node path(s) to arrive before executing

_PM.Escalations.AddAlertMessage=Add Alert Message
_PM.Escalations.AddEscalation=Add Escalation
_PM.Escalations.AreYouSure=Are you sure you would like to remove this escalation?
_PM.Escalations.ChangePriorityTo=Change priority to
_PM.Escalations.ChangeThePriorityOfThisTask=Change the priority of this task
_PM.Escalations.ConfigureTheTimerEvent=Configure the Timer Event to activate escalation
_PM.Escalations.EditAlertMessage=Edit Alert Message
_PM.Escalations.Escalation=Escalation
_PM.Escalations.EscalationDateCannotBeLeftBlank=Escalation date cannot be left blank.
_PM.Escalations.Escalations=Escalations
_PM.Escalations.EscalationTimeCannotBeLeftBlank=Escalation time cannot be left blank.
_PM.Escalations.EscalationTimeCannotBeLeftBlank.##CONTEXT##=This is either a number of minutes/hours/days or can be a specific date and time
_PM.Escalations.EscalationTimeMustBeANonNegative=Escalation time must be a non-negative whole number.
_PM.Escalations.EscalationTimeMustBeANonNegative.##CONTEXT##=This is used for the # of minutes/hours/days
_PM.Escalations.EscalationsHelp=Use escalations to determine how a node is handled when escalated by a process administrator. Escalations are optional. Click the \"Add Escalation\" button to customize an escalation.
_PM.Escalations.HelpMessage=The message that will be sent as the alert.
_PM.Escalations.Level=Level
_PM.Escalations.Lower=Lower
_PM.Escalations.MaximumLengthOfChars=Maximum length of {0} characters
_PM.Escalations.PleaseSelectForThisEscalation=Please select to \'reassign\', \'change priority\', or \'send notification\' for this escalation.
_PM.Escalations.PleaseSpecifyAnEscalationDelay=Please specify an escalation delay.
_PM.Escalations.PleaseSpecifyAnExpression=Please specify an expression.
_PM.Escalations.priorityByASingleLevel=priority by a single level
_PM.Escalations.priorityByASingleLevel.##CONTEXT##=This is inserted after a dropdown that contains the phrases "Raise" and "Lower"
_PM.Escalations.PriorityLevel=Priority Level
_PM.Escalations.Raise=Raise
_PM.Escalations.ReassignTaskTo=Reassign task to
_PM.Escalations.Recipients=Recipients
_PM.Escalations.SelectAtLeastOneUser=Select at least one user, group or role to reassign this task to.
_PM.Escalations.SendAlert=Send Alert
_PM.Escalations.SendMessageEvent=Send Message Event
_PM.Escalations.ShowAdvancedOptions=Show Advanced Options
_PM.Escalations.SkipEscalation=Skip Escalation
_PM.Escalations.Subject=Subject
_PM.Escalations.TheEscalationHasBeenSkipped=The escalation has been skipped.
_PM.Escalations.TheEscalationHasBeenTriggered=The escalation has been triggered.
_PM.Escalations.ThereAreNoEscalationsThatCanBeSkippedOrTriggered=There are no escalations that can be skipped or triggered.
_PM.Escalations.TheTimerEventWhichWillActiveThisEscalation=The Timer Event which will active this escalation
_PM.Escalations.ThisEscalationIsConfiguredToSendANotification=This escalation is configured to send a notification, but no recipients have been specified.
_PM.Escalations.ThisEscalationWasTriggeredOn=This escalation was triggered on
_PM.Escalations.TriggerEscalation=Trigger Escalation
_PM.Escalations.TimerEvent=Timer Event
_PM.Escalations.WhatActionShouldBeTaken=What action should be taken?

_PM.General.AllowAnyoneToFireTriggers=Allow anyone to fire triggers.
_PM.General.AllowPriorities=Allow priorities of processes and tasks to be changed once started.
_PM.General.By=by
_PM.General.By.##CONTEXT##={date} by {user} [used for creation and modified dates]
_PM.General.CreatedOn=Created on
_PM.General.EmailAttachmentsFolder=Email Attachments Folder
_PM.General.EmailAttachmentsFolderInstructions=The folder into which e-mail attachments sent to this Process Model will be placed.
_PM.General.HelpText=On the left you can edit the name and description of this process model. Also enter the process display name, which indicates the name of each process started with this model.
_PM.General.LastModifiedOn=Last Modified on
_PM.General.OverrideWithTheInitiators=Override with the initiator\'s time zone.
_PM.General.ProcessDisplayName=Process Display Name
_PM.General.ProcessDisplayNameInstructions=The name of the process as it appears to users after a process of this model has been started.
_PM.General.ProcessModelID=Process Model ID
_PM.General.ProcessModelName=Process Model Name
_PM.General.ProcessModelUUID=Process Model UUID
_PM.General.ProcessPriority=Process Priority
_PM.General.PublicEvents=Public Events
_PM.General.PublicEventsInstructions=Allows this model to receive messages sent by any user
_PM.General.ElasticScale=Elastic Scale
_PM.General.ElasticScaleInfo=Some smart services, nodes, and configuration options are incompatible with elastic scale. Validate the process model to check for problems.
_PM.General.ElasticScaleLearnMore=Learn More
_PM.General.ExecutionArchitectureInstructions=
_PM.General.RunInEPEx=Execute processes using the elastic engine
_PM.General.SubProcessesUseParent=Sub-processes use the parent process\' time zone
_PM.General.TimeZone=Time Zone
_PM.General.UnsavedProcessModel=Unsaved Process Model
_PM.General.YouMustEnterPMName=You must enter a valid process model name.
_PM.General.YouMustEnterPMDisplayName=You must enter a valid process display name.

_PM.Lane.Color=Color
_PM.Lane.Height=Height
_PM.Lane.General=General
_PM.Lane.Minimum=Minimum
_PM.Lane.Name=Name
_PM.Lane.Pixels=pixels
_PM.Lane.SpecifyGeneralProperties=Specify general properties for this lane.
_PM.Lane.Width=Width

_PM.Messages.Dismiss=Dismiss
_PM.Messages.Error=error
_PM.Messages.Error.##CONTEXT##=This goes in the title field for an error icon in the process model, when any generic type of error occurs
_PM.Messages.Info=info
_PM.Messages.Recommendation=recommendation
_PM.Messages.Warning=warning

_PM.Menu.AddHorizontalLane=Add Horizontal Lane
_PM.Menu.AddVerticalLane=Add Vertical Lane
_PM.Menu.Advanced=Advanced
_PM.Menu.ApplyChanges=Apply Changes
_PM.Menu.Assignment=Assignment
_PM.Menu.BPMNView=BPMN View
_PM.Menu.CancelProcess=Cancel Process
_PM.Menu.CancelTask=Cancel Task
_PM.Menu.Close=Close
_PM.Menu.CloseAll=Close All
_PM.Menu.Copy=Copy
_PM.Menu.Cut=Cut
_PM.Menu.Delete=Delete
_PM.Menu.Edit=Edit
_PM.Menu.EnhancedView=Enhanced View
_PM.Menu.Escalations=Escalations
_PM.Menu.Exit=Exit
_PM.Menu.File=File
_PM.Menu.GenerateDocumentation=Generate Documentation
_PM.Menu.Grid=Grid
_PM.Menu.HideGrid=Hide Grid
_PM.Menu.HideMessages=Hide Messages
_PM.Menu.HideNodeMetrics=Hide Node Metrics
_PM.Menu.Import=Import
_PM.Menu.LaneProperties=Lane Properties
_PM.Menu.Lanes=Lanes
_PM.Menu.Messages=Messages
_PM.Menu.Modify=Modify
_PM.Menu.NewProcessModel=New Process Model
_PM.Menu.NodeMetrics=Node Metrics
_PM.Menu.Open=Open...
_PM.Menu.OpenParentProcess=Open Parent Process
_PM.Menu.OpenProcessModel=Open Process Model
_PM.Menu.PauseProcess=Pause Process
_PM.Menu.PauseTask=Pause Task
_PM.Menu.Paste=Paste
_PM.Menu.PrintPreview=Print Preview
_PM.Menu.Print=Print...
_PM.Menu.Properties=Properties...
_PM.Menu.Redo=Redo
_PM.Menu.RemoveAllLanes=Remove All Lanes
_PM.Menu.RemoveLane=Remove Lane
_PM.Menu.ResumeProcess=Resume Process
_PM.Menu.ResumeTask=Resume Task
_PM.Menu.Save=Save
_PM.Menu.SaveAs=Save As...
_PM.Menu.SaveAndPublish=Save & Publish
_PM.Menu.SaveNewVersion=Save New Version
_PM.Menu.SelectAll=Select All
_PM.Menu.Setup=Setup
_PM.Menu.ShowHideMessagesWindow=Show or Hide Messages Window
_PM.Menu.ShowHideNodeStatistics=Show or Hide Node Statistics
_PM.Menu.ShowGrid=Show Grid
_PM.Menu.ShowMessages=Show Messages
_PM.Menu.ShowNodeMetrics=Show Node Metrics
_PM.Menu.Snap=Snap
_PM.Menu.Snap.##CONTEXT##=The text for an icon that lets elements "snap" together or near to one another, matching the definition of snap as "cause to move or alter in a specified way with a brisk movement"
_PM.Menu.StartTask=Start Task
_PM.Menu.Tools=Tools
_PM.Menu.TurnSnapOff=Turn Snap Off
_PM.Menu.TurnSnapOn=Turn Snap On
_PM.Menu.Undo=Undo
_PM.Menu.Validate=Validate
_PM.Menu.Versions=Versions...
_PM.Menu.View=View
_PM.Menu.Security=Security
_PM.Menu.StartProcessfOrDebugging=Start Process for Debugging
_PM.Menu.ZoomIn=Zoom In
_PM.Menu.ZoomOut=Zoom Out

_PM.Monitor.ExistingVersions=Existing Versions
_PM.Monitor.NoTasksHaveBeenStarted=No tasks have been started from this node.
_PM.Monitor.SpawnedNodes=Spawned Nodes
_PM.Monitor.SpawnedNodesHelp=Spawned nodes are all represented by the underlying node in the Modeler. Please select a specific spawned node to execute immediate actions on it.
_PM.Monitor.VersionsOfDraftProcess=Versions of draft process models can be saved and restored.  When a draft process model is published, a major version label (eg. 1.0, 2.0) is created.

_PM.Months.January=January
_PM.Months.February=February
_PM.Months.March=March
_PM.Months.April=April
_PM.Months.May=May
_PM.Months.June=June
_PM.Months.July=July
_PM.Months.August=August
_PM.Months.September=September
_PM.Months.October=October
_PM.Months.November=November
_PM.Months.December=December

_PM.NodeDesc.ActivityChaining=Activity Chaining
_PM.NodeDesc.AllowUsersToStepBack=Allow users to step back to the start node from the next chained activity
_PM.NodeDesc.DefaultTaskPriority=Default Task Priority
_PM.NodeDesc.EndCondition=End Condition
_PM.NodeDesc.EndNodeDescription=If flow reaches this end event, the process will be marked with this end condition.
_PM.NodeDesc.HelpLine1=Use the form on the left to describe basic information about this node.
_PM.NodeDesc.HelpLine2=Name only appears in the process modeler. Description and Task Display Name are what the end user of the process see.
_PM.NodeDesc.InheritParentPriority=Allow child processes to inherit the parent process\' priority.
_PM.NodeDesc.NodeProperties=Node Properties
_PM.NodeDesc.QuickTaskDescription=Make this a Quick Task that can be completed on-demand
_PM.NodeDesc.TaskDescription=The name of the task as it appears in an assignee\'s task list
_PM.NodeDesc.TaskDisplayName=Task Display Name

_PM.NodeEventTypes.Default=Undefined Event
_PM.NodeEventTypes.ErrorProducer=Error
_PM.NodeEventTypes.ErrorTrigger=Error
_PM.NodeEventTypes.LinkProducer=Link Source
_PM.NodeEventTypes.LinkTrigger=Link
_PM.NodeEventTypes.MessageProducer=Send Message
_PM.NodeEventTypes.MessageTrigger=Receive Message
_PM.NodeEventTypes.RuleTrigger=Rule
_PM.NodeEventTypes.TimerTrigger=Timer
_PM.NodeEventTypes.TerminateProducer=Terminate Process

_PM.NodeEvents.AddEvent=Add Event
_PM.NodeEvents.ActivateMessageEvent=Activate Message Event
_PM.NodeEvents.ChangingTheJMSTopic=Changing the JMS topic may change the message type and clear all mappings. Are you sure you want to do this?
_PM.NodeEvents.ChangingTheMessageType=Changing the message type will clear all rules and output expressions. Are you sure you want to do this?
_PM.NodeEvents.ChangingTheMessageTypeMappings=Changing the message type will clear all mappings. Are you sure you want to do this?
_PM.NodeEvents.ConfigureThisEvent=Configure this Event
_PM.NodeEvents.EventConditions=Event Conditions
_PM.NodeEvents.EventNotSaved=Event Not Saved
_PM.NodeEvents.EventProperties=Event Properties
_PM.NodeEvents.EndEvents=End Events
_PM.NodeEvents.EndEvents.##CONTEXT##=This message appears on an "End Node" and refers to the collection of events associated with that "End Node"
_PM.NodeEvents.ExceptionEventTriggers=Exception Event Triggers
_PM.NodeEvents.JMSMessageDestination=JMS Message Destination
_PM.NodeEvents.ListenForMessagesOfType=Listen for messages of type
_PM.NodeEvents.MessageContent=Message Content
_PM.NodeEvents.MessageContentInstructions=Add properties for this message
_PM.NodeEvents.MessageDestinations=Message Destinations
_PM.NodeEvents.MessageDestinationsInstructions=Note: Only Events that have been saved will be available in the Picker
_PM.NodeEvents.MessageRouting=Message Routing
_PM.NodeEvents.MessageType=Message Type
_PM.NodeEvents.NoEventsConfigured=No events configured
_PM.NodeEvents.OnceActivatedListenForMessages=Once activated, listen for messages for the life of the process
_PM.NodeEvents.OptionalText=Optional Text
_PM.NodeEvents.OptionalTextInstructions=Specify additional text for the message body
_PM.NodeEvents.PersistentID=Persistent ID
_PM.NodeEvents.ProcessOnlyIfConditionsAreTrue=process only if conditions are true
_PM.NodeEvents.ProcessToProcess=Process to Process
_PM.NodeEvents.ReceiveMessages=Receive Messages
_PM.NodeEvents.SaveMessageContent=Save Message Content
_PM.NodeEvents.SaveReceivedContentToProcessVariables=Save received content to process variables
_PM.NodeEvents.SelectTheJMSDestination=Select the JMS Destination
_PM.NodeEvents.SendEventInfo=When you enter a receive message event, all running instances of the process model will receive the message. This can have negative performance impacts, and is not commonly used as a result. Instead, target specific processes by entering their IDs in the DestinationProcessID field on the Data tab.
_PM.NodeEvents.SendEventInfoEscalation=Starting a process model from an escalation is supported. To do so, configure a receive message trigger on the start node of the target process model and select it here as the message destination.
_PM.NodeEvents.SendEventWarningMessage=The option to start a process using the Send Message Event node has been deprecated, and will be removed in a future version of Appian. Use the Start Process smart service instead.
_PM.NodeEvents.StartEventTriggers=Start Event Triggers

_PM.RulesGrid.AConditionOrExpression=a condition or expression
_PM.RulesGrid.AConditionOrExpression.##CONTEXT##=It appears to be as part of a row of items, when trying to delete one, that an error may appear. The text will be inserted as: "Please select 'a condition or expression' row, and try again"
_PM.RulesGrid.DeleteMapping=Delete Mapping
_PM.RulesGrid.EnterAnExpression=Enter an expression
_PM.RulesGrid.EnterValueHere=Enter value here
_PM.RulesGrid.ImportCustomProperties=Import Custom Properties
_PM.RulesGrid.MessageProperties=Message Properties
_PM.RulesGrid.MultipleQuestion=Multiple?
_PM.RulesGrid.NewCondition=New Condition
_PM.RulesGrid.NewExpression=New Expression
_PM.RulesGrid.NewMapping=New Mapping
_PM.RulesGrid.NoConditionsConfigured=No conditions configured
_PM.RulesGrid.NoEnumerationValues=No enumeration values
_PM.RulesGrid.NoMappingsConfigured=No mappings configured
_PM.RulesGrid.NoProcessVariablesAvailable=No Process Variables Available
_PM.RulesGrid.NoOutputsFound=No outputs found
_PM.RulesGrid.OpenTheExpressionEditor=Open the Expression Editor
_PM.RulesGrid.ProcessVariable=Process Variable
_PM.RulesGrid.SelectAProcessVariable=Select a process variable
_PM.RulesGrid.TypeValueHere=Type value here
_PM.RulesGrid.ValueMustBeADecimal=Value must be a decimal
_PM.RulesGrid.ValueMustBeAWholeNumber=Value must be a whole number


_PM.Schedule.At=at
_PM.Schedule.AfterActivationOfTheTimerEvent=after activation of the timer event
_PM.Schedule.AfterActivationOfTheTimerEvent.##CONTEXT##=This string appears directly after an expressionable field and a dropdown. The full text would read "Don't skip this node until {expression} {minutes} after activation of the timer event.
_PM.Schedule.AfterTheLastNodeCompletes=after the last node completes
_PM.Schedule.AfterTheLastNodeCompletes.##CONTEXT##=This message appears after a dropdown that contains Minutes/Hours/Days/Months.  The user has the ability to type an expression before said dropdown that will specifiy how many Minutes/Hours/Days/Months
_PM.Schedule.AtAnInterval=At an interval
_PM.Schedule.Daily=Daily
_PM.Schedule.DailyTimeShouldBeFormattedAs=Daily time should be formatted as
_PM.Schedule.Days=Day(s)
_PM.Schedule.DaysSmall=day(s)
_PM.Schedule.DelayFor=Delay for
_PM.Schedule.DelayUntilTheDateAndTimeSpecifiedByThisExpression=Delay until the date and time specified by this expression
_PM.Schedule.DontStartThisNodeUntil=Don\'t start this node until
_PM.Schedule.Escalate=Escalate
_PM.Schedule.EscalateAtTheDateAndTimeSpecifiedByThisExpression=Escalate at the date and time specified by this expression
_PM.Schedule.Every=Every
_PM.Schedule.EverySmall=every
_PM.Schedule.EveryWeekday=Every weekday
_PM.Schedule.ExecuteWhenTheNodeIsActivatedByTheSystem=Execute when the node is activated by the system.
_PM.Schedule.ExpressionIsTrue=Expression is true
_PM.Schedule.FollowExceptionFlow=Follow Exception Flow
_PM.Schedule.Hours=Hour(s)
_PM.Schedule.HoursSmall=hour(s)
_PM.Schedule.InstancesHaveStarted=instances have started
_PM.Schedule.Minutes=Minute(s)
_PM.Schedule.MinutesSmall=minute(s)
_PM.Schedule.Monthly=Monthly
_PM.Schedule.MonthlyTimeShouldBeFormattedAs=Monthly time should be formatted as
_PM.Schedule.Months=Month(s)
_PM.Schedule.MonthsSmall=month(s)
_PM.Schedule.NoDelay=No Delay
_PM.Schedule.Of=of
_PM.Schedule.OfEvery=of every
_PM.Schedule.OfEvery.##CONTEXT##=This will be used as an option for scheduling a recurring task on a day of the week (e.g. of every Wednesday)
_PM.Schedule.OnDay=On day
_PM.Schedule.OnDay.##CONTEXT##=This will be used as an option for scheduling a recurring task on a day of the month, the user will be choosing a number for the day of the month.
_PM.Schedule.Options1st=1st
_PM.Schedule.Options2nd=2nd
_PM.Schedule.Options3rd=3rd
_PM.Schedule.Options4th=4th
_PM.Schedule.OptionsLast=Last
_PM.Schedule.RecurringTimerEscalation=Recurring Timer Escalation
_PM.Schedule.RepeatIndefinitelyOrUntilCancelled=Repeat indefinitely, or until cancelled
_PM.Schedule.RelativeDelay=Relative Delay
_PM.Schedule.RepeatNode=Repeat Node
_PM.Schedule.RepeatThisNode=Repeat this node
_PM.Schedule.RepeatThisTask=Repeat this task
_PM.Schedule.RepeatUntil= Repeat until
_PM.Schedule.ScheduledDelay=Scheduled Delay
_PM.Schedule.ScheduledStart=Scheduled Start
_PM.Schedule.SchedulingHelp=By default, nodes are kicked off as soon as the node becomes active. You can override the default by scheduling an absolute, relative, or recurring time to initiate the node.
_PM.Schedule.SkipThisNode=Skip this node
_PM.Schedule.SkipThisNodeAtTheDateAndTimeSpecifiedByThisExpression=Skip this node at the date and time specified by this expression
_PM.Schedule.StartingAt=starting at
_PM.Schedule.StartingAt.##CONTEXT##=This will be used as an option for scheduling a recurring task starting at a time selected by the user.
_PM.Schedule.Status=Status
_PM.Schedule.The=The
_PM.Schedule.The.##CONTEXT##=Translate if possible only.
_PM.Schedule.TheDateAndTimeSpecifiedByThisExpression=The date and time specified by this expression
_PM.Schedule.TimerEscalationActivation=Timer Escalation Activation
_PM.Schedule.TimerRecurrence=Timer Recurrence
_PM.Schdeule.TwelveAM=12:00 AM
_PM.Schedule.WeeksOn=week(s) on
_PM.Schedule.WeeksOn.##CONTEXT##=This will be used as an option for scheduling a recurring task starting on the weeks selected by the user.
_PM.Schedule.Weekly=Weekly
_PM.Schedule.WeeklyTimeShouldBeFormattedAs=Weekly time should be formatted as
_PM.Schedule.Yearly=Yearly

_PM.Scope.AdminConfig=Admin Config
_PM.Scope.Assignees=Assignees
_PM.Scope.ElasticScaleCompatibility=Elastic Scale Compatibility
_PM.Scope.Escalation=Escalation
_PM.Scope.Event=Event
_PM.Scope.Expression=Expression
_PM.Scope.Flow=Flow
_PM.Scope.Forms=Forms
_PM.Scope.GroupOwner=Group Owner
_PM.Scope.Lane=Lane
_PM.Scope.Node=Node
_PM.Scope.Parameter=Parameter
_PM.Scope.Process=Process
_PM.Scope.ProcessModelFolder=Process Model Folder
_PM.Scope.ProcessModelImport=Process Model Import
_PM.Scope.Rule=Rule
_PM.Scope.Scheduling=Scheduling
_PM.Scope.Subprocess=Subprocess
_PM.Scope.Timer=Timer
_PM.Scope.Variable=Variable

_PM.Tabs.ActivityExceptions=Activity Exceptions
_PM.Tabs.AddAttachment=Add Attachment
_PM.Tabs.AddNote=Add Note
_PM.Tabs.Alerts=Alerts
_PM.Tabs.AlertMessage=Alert Message
_PM.Tabs.Assignment=Assignment
_PM.Tabs.Association=Association
_PM.Tabs.AssociationProperties=Association Properties
_PM.Tabs.Attachments=Attachments
_PM.Tabs.By=by
_PM.Tabs.By.##CONTEXT##={date} by {user} [used for creation and modified dates]
_PM.Tabs.CannotOpenANodeDialogAsNoNodeIsSelected=cannot open a node dialog as no node is selected
_PM.Tabs.ChangeDeadline=Change Deadline
_PM.Tabs.ChangePriority=Change Priority
_PM.Tabs.ChildProcessWarning=Child Process Warning
_PM.Tabs.ClickSubmitToChangeThePriorityImmediately=Click submit to change the priority immediately.
_PM.Tabs.Configure=Configure
_PM.Tabs.ConfigureLane=Configure Lane
_PM.Tabs.ContinueEditing=Continue Editing
_PM.Tabs.CreatesAPotentiallyRecursiveRelationship=WARNING: The sub-process creates a potentially recursive relationship. It is recommended to remove this sub-process, or alter the sub-process itself.
_PM.Tabs.Created=Created
_PM.Tabs.CreateInterface=Create Interface
_PM.Tabs.CurrentTasks=Current Tasks
_PM.Tabs.Data=Data
_PM.Tabs.DataManagement=Data Management
_PM.Tabs.DataSmall=data
_PM.Tabs.DataSmall.##CONTEXT##=This will be a standalone link to data
_PM.Tabs.Deadlines=Deadlines
_PM.Tabs.Decision=Decision
_PM.Tabs.Delete=Delete
_PM.Tabs.Description=Description
_PM.Tabs.EditAnyway=Edit Anyway
_PM.Tabs.EditNote=Edit Note
_PM.Tabs.EditProcessVariable=Edit Process Variable
_PM.Tabs.Errors=Errors
_PM.Tabs.Escalations=Escalations
_PM.Tabs.Exceptions=Exceptions
_PM.Tabs.FileName=File Name
_PM.Tabs.FlowProperties=Flow Properties
_PM.Tabs.FolderName=Folder Name
_PM.Tabs.FormElementOptions=Form Element Options
_PM.Tabs.Forms=Forms
_PM.Tabs.General=General
_PM.Tabs.HasAPotentiallyRecursiveRelationship=WARNING: The sub-process has a potentially recursive relationship inside. It is recommended to fix the sub-process first.
_PM.Tabs.HTMLChecker=HTML Checker
_PM.Tabs.InlineTaskApprovalDisabled=Inline task approval has been disabled in some of the task forms as they contain a required field.
_PM.Tabs.Lane=Lane
_PM.Tabs.LastModified=Last Modified
_PM.Tabs.LimitReached=Limit reached
_PM.Tabs.Load=Load
_PM.Tabs.LoadingNewVersionWillCause=Loading the new version will cause all unsaved changes to be lost. Do you wish to continue?
_PM.Tabs.Mapping=Mapping
_PM.Tabs.MessageExceedsMaximumNumberOfCharacters=Message exceeds maximum number of characters.
_PM.Tabs.Move=Move
_PM.Tabs.NewNodeInput=New Node Input
_PM.Tabs.NewProcessVariable=New Process Variable
_PM.Tabs.NoMappingsFound=No mappings found
_PM.Tabs.Notes=Notes
_PM.Tabs.Optional=optional
_PM.Tabs.Other=Other
_PM.Tabs.ParentProcessWarning=Parent Process Warning
_PM.Tabs.PleaseFirstSelectAVersionFromTheList=Please first select a version from the list.
_PM.Tabs.Printed=Printed
_PM.Tabs.ProcessDetails=Process Details
_PM.Tabs.ProcessHistory=Process History
_PM.Tabs.ProcessInstances=Process Instances
_PM.Tabs.ProcessModelProperties=Process Model Properties
_PM.Tabs.ProcessNodes=Process Nodes
_PM.Tabs.ProcessStartForm=Process Start Form
_PM.Tabs.QuickTasks=Quick Tasks
_PM.Tabs.Recurrence=Recurrence
_PM.Tabs.Results=Results
_PM.Tabs.SaveAs=Save As
_PM.Tabs.SaveNew=Save New
_PM.Tabs.SaveNew.##CONTEXT##=This will be a standalone action
_PM.Tabs.SaveNewVersion=Save New Version
_PM.Tabs.Scheduling=Scheduling
_PM.Tabs.Setup=Setup
_PM.Tabs.SomeoneElseStartedEditing=Someone Else Started Editing
_PM.Tabs.SomeoneIsAlreadyEditing=Someone Is Already Editing
_PM.Tabs.SpawnedNodes=Spawned Nodes
_PM.Tabs.SubProcesses=Sub-Processes
_PM.Tabs.TheMaximumNumberOfTabs=The maximum number of tabs has already been reached. Please close some tabs before continuing.
_PM.Tabs.Triggers=Triggers
_PM.Tabs.Untitled=Untitled
_PM.Tabs.UnableToGenerateDocumentation=Unable to generate documentation. Please disable your web browser\'s pop-up blocker and try again.
_PM.Tabs.Validation=Validation
_PM.Tabs.Variables=Variables
_PM.Tabs.Versions=Versions
_PM.Tabs.ViewReadOnly=View Read-Only
_PM.Tabs.ViewSubProcessModel=View Sub-Process Model
_PM.Tabs.Warning=Warning
_PM.Tabs.YouMustEnterRecipientsForThisAlert=You must enter recipients for this alert.

_PM.Timer.ConfigureTimerEvent=Configure Timer Event
_PM.Timer.TimerConditions=Timer Conditions
_PM.Timer.TimerInstructions=Timer will fire only if all conditions are true

_PM.Toolbar.ActivityExceptions=Activity Exceptions
_PM.Toolbar.AddHorizontalLane=Add Horizontal Lane
_PM.Toolbar.AddVerticalLane=Add Vertical Lane
_PM.Toolbar.AnalystView=Analyst View
_PM.Toolbar.Annotation=Annotation
_PM.Toolbar.Font=Font
_PM.Toolbar.FontSize=Font Size
_PM.Toolbar.FontColor=Font Color
_PM.Toolbar.Bold=Bold
_PM.Toolbar.Italic=Italic
_PM.Toolbar.Underline=Underline
_PM.Toolbar.ChooseConnectorMode=Choose Connector Mode
_PM.Toolbar.ChooseProcessMode=Choose Process Mode
_PM.Toolbar.ChooseLaneOrientation=Choose Lane Orientation
_PM.Toolbar.Connect=Connect
_PM.Toolbar.DesignerView=Designer View
_PM.Toolbar.EditProcessView=Edit Process View
_PM.Toolbar.HideFontPalette=Hide Font Palette
_PM.Toolbar.HideGrid=Hide Grid
_PM.Toolbar.Mode=Mode
_PM.Toolbar.MonitorProcessView=Monitor Process View
_PM.Toolbar.NewProcess=New Process
_PM.Toolbar.OpenAndEditInNewCanvas=Open and edit in new canvas
_PM.Toolbar.OpenAndMonitorInNewCanvas=Open and monitor in new canvas
_PM.Toolbar.OpenProcess=Open Process
_PM.Toolbar.Print=Print
_PM.Toolbar.ProcessDetails=Process Details
_PM.Toolbar.ProcessInstances=Process Instances
_PM.Toolbar.Redo=Redo
_PM.Toolbar.Refresh=Refresh
_PM.Toolbar.SaveProcess=Save Process
_PM.Toolbar.Select=Select
_PM.Toolbar.ShowFontPalette=Show Font Palette
_PM.Toolbar.ToggleGridlines=Toggle Gridlines
_PM.Toolbar.ToggleMessageWindow=Toggle Message Window
_PM.Toolbar.ToggleNodeStatistics=Toggle Node Statistics
_PM.Toolbar.Undo=Undo
_PM.Toolbar.Validate=Validate
_PM.Toolbar.ViewSimpleHelp=Switch to Analyst view to quickly draft high-level process diagrams
_PM.Toolbar.ViewExpertHelp=Switch to Designer view to configure advanced options and publish production-ready process models
_PM.Toolbar.Zoom=Zoom
_PM.Toolbar.ZoomIn=Zoom In
_PM.Toolbar.ZoomOut=Zoom Out

_PM.ValidationError.GuidanceActivityChainedUnattendedMniNode=Unattended nodes configured to run multiple instances (MNI) have incoming activity chaining. Consider redesigning your process to make this MNI activity a bulk or asynchronous operation. Chaining through these nodes can cause a poor user experience or performance issues. Nodes: {0}.
_PM.ValidationError.GuidanceAsynchronousSubprocess=A subprocess node is set to run asynchronously and is either used in a loop or configured to run multiple instances (MNI). Instead, consider using the Start Process smart service, which has built-in load balancing. Initiating a large number of processes with the Subprocess node can slow down performance. Nodes: {0}.
_PM.ValidationError.GuidanceCustomAlertIndividualUsers=This process model targets a user as the alert recipient. Appian recommends sending alerts to groups, since the same users may not exist on all environments.
_PM.ValidationError.GuidanceDatatypesPassedByReference=Subprocess nodes pass custom data types by reference. Consider not passing the data type by reference and instead updating the value with an output variable. Passing data types by reference can cause issues with long-lived processes. Nodes: {0}.
_PM.ValidationError.GuidanceGatewayTooManyIncomingFlows=Gateway nodes in a loop have more than one incoming flow. Place a script task in front of each of these gateway nodes to merge incoming flows. Nodes: {0}.
_PM.ValidationError.GuidanceNoCustomAlertSettings=This process model uses the system default for alerts. Alerts should be sent to an application-specific group. Using the system default only alerts process administrators, process model administrators, and system administrators, who may differ across environments.
_PM.ValidationError.GuidanceDisplayNameNotDynamic=Process display name is not dynamic. Consider using an expression to define a unique display name per process. Having unique process display names makes it easier to monitor and debug active processes. Affected locales: {0}.
_PM.ValidationError.GuidanceTaskNameNotDynamic=A user input task display name is not dynamic. Consider using an expression to define a unique display name per user input task. Having unique display names makes it easier for users to differentiate between their tasks in Tempo and task reports. Nodes: {0}.
_PM.ValidationError.GuidanceTooManyNodes={0} process nodes detected. Consider splitting this process into smaller subprocesses. Having more than 30 nodes can complicate maintainability and lead to higher memory consumption.
_PM.ValidationError.GuidanceTooManyVariables={0} process variables detected. Consider whether process variables should be activity class parameters or split the process into smaller subprocesses. Having more than 50 process variables can complicate maintainability and lead to higher memory consumption.
_PM.ValidationError.ProcessModelSaved=The process model has been saved. Dismissed recommendations will reappear the next time you open this model, unless you Save & Publish.
_PM.ValidationError.GuidanceSendMessageEventMissingTargetProcess=A send message event is not configured to target a specific process. Consider providing a destination process ID on the Data tab to target specific processes. Sending a message to all process instances is less efficient and can have performance implications. Nodes: {0}.

_PM.ValidationError.GuidanceEPExProcessNoAlert=Alerts for process errors will not be sent for the process model while elastic scale is enabled. Check for recent process instances with errors in the elastic process activity page.
_PM.ValidationError.GuidanceEPExProcessDataDeletion=Process data is immediately deleted for successful processes with elastic scale enabled. Processes with errors are available until deleted. Manual data management configurations for process models will be ignored.
_PM.ValidationError.GuidanceEPExProcessCreateFolder=Some nodes are not intended for high throughput usage and should only be used at low frequency in processes with elastic scale enabled. Nodes: {0}

_PM.ValidationError.GuidanceExpressionBadStartProcessParameter=Update the underlined parameters so that they match a valid process parameter on the given process model.
_PM.ValidationError.GuidanceExpressionContainsUndocumentedFunction=Unsupported function detected. Refactor your expression to use documented functions. The function you have called is not supported and may break on upgrade. Locations: {0}
_PM.ValidationError.GuidanceExpressionMissingDomain=Missing domain prefix. A variable or rule is being called without a domain prefix. It is a best practice to use domain prefixes in your expressions to ensure that the appropriate variable or rule is referenced at runtime. Locations: {0}
_PM.ValidationError.GuidanceExpressionMissingKeywordSyntax=Missing keyword syntax. Use keywords to pass inputs into rules or data types. By using keyword syntax, you protect the current expression against backwards compatibility issues if inputs change in the future. Locations: {0}
_PM.ValidationError.GuidanceExpressionUnrecognizedKeyword=Invalid parameter. Update the underlined parameters so that they match a documented option. Parameters that do not exist in the function, rule, or data type are ignored. Locations: {0}
_PM.ValidationError.GuidanceExpressionUnusedLocalVariables=Unused local variable. A local variable is declared but is not used within an expression. If you do not intend to use the local variable, Appian recommends removing it. Unused local variables can perform unnecessary queries and complicate comprehension and maintainability. Locations: {0}
_PM.ValidationError.GuidanceInvalidKeywordSyntax=Invalid keyword syntax. There are more keywords than arguments. Modify the expression so that each keyword takes a single argument. Invalid keyword syntax will cause problems during export and may affect runtime. Locations: {0}
_PM.ValidationError.GuidanceUnusedProcessVariable=This process model contains a process variable that it does not reference. Remove the variable if you do not intend to use it and have confirmed that it is not in use by a process report. Unused process variables can complicate comprehension and maintainability. Process variables: {0}.

_PM.ValidationError.WriteRecordsRecordInputDoesNotExist=Invalid Setup configuration for the {1} node. The "Records" input cannot be null.
_PM.ValidationError.WriteRecordsEventsNotConfigured=The record type for the "Records" input on the {1} node does not have record events configured.

_PM.ValidationError.WriteRecordsInvalidEventRecordRelationship=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The relationship to the Event History record type does not exist or it is not configured as a one-to-many relationship.
_PM.ValidationError.WriteRecordsInvalidEventRecordRelationshipJoinField=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The base record type must use the primary key field as the common field in the relationship to the Event History record type.
_PM.ValidationError.WriteRecordsInvalidEventRecordType=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event History record type does not exist, has been deleted, or you do not have sufficient permission to access it.

_PM.ValidationError.WriteRecordsRecordTypeNotSyncedOrRdbmsBacked=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event History record type must have data sync enabled and use a database as the source.
_PM.ValidationError.WriteRecordsRecordTypeInvalidSync=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event History record type must have data sync enabled and use a database as the source.
_PM.ValidationError.WriteRecordsEventRecordAndBaseDifferentSources=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event History record type does not have the same data source as the base record type.

_PM.ValidationError.WriteRecordsAutomationTypeNull=Invalid Setup configuration for the node {1}. There is no field mapped for "Automation Type".
_PM.ValidationError.WriteRecordsInvalidEventTypeRecordType=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event Type Lookup record type does not exist, has been deleted, or you do not have sufficient permission to access it.
_PM.ValidationError.WriteRecordsEventTypeRecordTypeNotSynced=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event Type Lookup record type must have data sync enabled and use a database as the source.
_PM.ValidationError.WriteRecordsEventTypeRecordTypeInvalidSync=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The Event Type Lookup record type must have data sync enabled and use a database as the source.
_PM.ValidationError.WriteRecordsInvalidEventTypeRecordRelationship=The record type for the "Records" input on the {1} node has an invalid configuration for its record events. The relationship to the Event Type Lookup record type does not exist or it is not configured as a many-to-one relationship.

_PM.Variables.AddVariable=Add Variable
_PM.Variables.CurrentlyNoProcessVariablesHaveBeenDefined=Currently no process variables have been defined.
_PM.Variables.FromForm=From form
_PM.Variables.HelpText=Configure your process variables below. To add a new variable click on the \'Add Variable\' button. To edit a variable click on the corresponding row to bring up an form to change the variables values. To delete a variable, click on the remove button.
_PM.Variables.NoValue=No Value
_PM.Variables.ProcessVariables=Process Variables
_PM.Variables.RemoveProcessVariable=Remove Process Variable
_PM.Variables.YouMustSelectAValidTypeForEachProcessVariable=You must select a valid type for each process variable.

_PM.Weeks.Monday=Monday
_PM.Weeks.Tuesday=Tuesday
_PM.Weeks.Wednesday=Wednesday
_PM.Weeks.Thursday=Thursday
_PM.Weeks.Friday=Friday
_PM.Weeks.Saturday=Saturday
_PM.Weeks.Sunday=Sunday

_AP.Errors.AC.Noassignees=Node {0} is attended and does not have any assignees declared.
_AP.Errors.AC.Noassignees.##CONTEXT##=The placeholder is the name of the node. The name of the node can be customized. By default the name of the node defaults to what Appian Node type it is (e.g User Input Task, Send Email) 
_AP.Errors.AC.Invalidunattendedtype=Node {0} can either be attended or unattended.  Please choose one.
_AP.Errors.AC.Invalidunattendedtype.##CONTEXT##=The placeholder is the name of the node. The name of the node can be customized. By default the name of the node defaults to what Appian Node type it is (e.g User Input Task, Send Email) 
_AP.Errors.AC.Invalidrunas=Node {0} is unattended and does not have a valid user to run as.
_AP.Errors.AC.Invalidrunas.##CONTEXT##=The placeholder is the name of the node. The name of the node can be customized. By default the name of the node defaults to what Appian Node type it is (e.g User Input Task, Send Email) 
_AP.Errors.AC.Completion=The value of Target Completion for Node {0} is invalid. Please enter a positive number.
_AP.Errors.AC.Completion.##CONTEXT##=The placeholder is the name of the node. The name of the node can be customized. By default the name of the node defaults to what Appian Node type it is (e.g User Input Task, Send Email) 
_AP.Errors.AC.Lag=The value of Target Lag for Node {0} is invalid. Please enter a positive number.
_AP.Errors.AC.Lag.##CONTEXT##=The placeholder is the name of the node. The name of the node can be customized. By default the name of the node defaults to what Appian Node type it is (e.g User Input Task, Send Email) 
_AP.Errors.AC.Complexflowsin=A complex node requires specific paths to complete, but no such paths are configured.

_AP.Errors.ACP.Typesconflictassignto=In node {0} the output of parameter {1} has been assigned to process variable {2} however they are of different types.
_AP.Errors.ACP.Typesconflictassignto.##CONTEXT##=Placeholder {0} is the name of the node, placeholder {1} is the name of the parameter, placeholder {2} is the name of the process variable.
_AP.Errors.ACP.Typesconflictdefault=In node {0} the process variable {1} has been assigned as a default value for parameter {2} however they are of different types.
_AP.Errors.ACP.Typesconflictdefault.##CONTEXT##=All 3 placeholders relate to user-defined objects: 1 is the node, 2 is the name of the variable and 3 is the name of the parameter
_AP.Errors.ACP.Invalid=The activity class {0} on node {1} contains an invalid activity class parameter.
_AP.Errors.ACP.Invalid.##CONTEXT##=1 is the defined activity class, and 2 is the name of the node
_AP.Errors.ACP.Deferred=Node {0} contains an activity class with an parameter that has a deferred type.  The parameter name is {1}.  The activity class is {3}.  Please assign this parameter a valid type.
_AP.Errors.ACP.Deferred.##CONTEXT##=Placeholder is the name of the node.
_AP.Errors.ACP.Invalidassignto=Parameter {1} for node {0} has an invalid assign to process variable.
_AP.Errors.ACP.Invalidassignto.##CONTEXT##=Placeholder {0} is the name of the parameter, placeholder {1} is the name of the node.
_AP.Errors.ACP.Nodefaultfornotnullandnotmutable=Parameter {0} on Activity Class {1} on node {2} does not allow users to change the value, and does not allow for null values, however there is no default value.  Please enter a default value.
_AP.Errors.ACP.Nodefaultpv=Activity class {2}  on node {0} contains an activity class parameter {1} that has been assigned from a process variable, but no process variable has been selected.  Please choose a process variable.
_AP.Errors.ACP.Nodefaultforrequiredunattended=Parameter {0} on Activity Class {1} on node {2} requires a value.  Since this node is unattended, you must enter a value during design.
_AP.Errors.ACP.Nodefaultormappingforrequiredattended=Parameter {0} on Activity Class {1} on node {2} requires a value.  You must enter a value during design or map a form element to this parameter on every enabled form.
_AP.Errors.ACP.Nodefaultormappingforrequiredattended.##CONTEXT##=Placeholder {0} is the name of the parameter, {1} is the name of the activity class, {2} is the name of the node.
_AP.Errors.ACP.Norule=Activity Class {0} on node {1} does not have any rules.  Please create at least one rule.
_AP.Errors.ACP.Norule.##CONTEXT##=Placeholder {0} is the name of the activity class, {1} is the name of the node.
_AP.Errors.ACP.Invalidruledestination=Activity Class {0} on node {1} contains a rule that goes to a node that it has no path to.
_AP.Errors.ACP.Invalidruledestination.##CONTEXT##=Placeholder {0} is the name of the activity class, {1} is the name of the node.
_AP.Errors.ACP.Invaliddefaultdestination=Activity Class {0} on node {1} specifies a default node that it has no path to.
_AP.Errors.ACP.Invaliddefaultdestination.##CONTEXT##=Placeholder {0} is the name of the activity class, {1} is the name of the node.
_AP.Errors.ACP.Nonedefaultdestination=Node {0} has -None- defined as the default path. If this path is encountered during execution, the flow will end.
_AP.Errors.ACP.Invalid_type_transformation=The data type {0} has been modified since this model was last published and an error occurred when automatically transforming a value for one of the fields of a node input. The value has been set to the default value of the new type of the node input field. The previous value of the field was [value={2}, type={3}]. Please review the value set for the node input {1} in the node {4} and correct as needed.
_AP.Errors.ACP.Invalid_type_transformation.##CONTEXT##=Placeholder {2} is the name of the node input, {3} is the name of the node
_AP.Errors.ACP.Saveintoinvalidtype=Node {0} contains a parameter {1} which saves into PV {2}, but they are not of the same type.
_AP.Errors.ACP.Saveintoinvalidtype.##CONTEXT##=Placeholder {0} is the name of the node, {1} is the name of the parameter, {2} is the name of the process variable.

_AP.Errors.ACP.Invalidnumber=In Node {0}, the parameter {1} is not a valid number.
_AP.Errors.ACP.Invalidnumber.##CONTEXT##=Placeholder {0} is the name of the node, {1} is the name of the parameter.
_AP.Errors.ACP.Invalidnumber_multiple=In Node {0}, the parameter {1} is not a valid number. Please separate multiple numbers with commas.
_AP.Errors.ACP.Invaliddecimal=In Node {0}, the parameter {1} is not a valid decimal.
_AP.Errors.ACP.Invaliddecimal.##CONTEXT##=Placeholder {0} is the name of the node, {1} is the name of the parameter.
_AP.Errors.ACP.Invaliddecimal_multiple=In Node {0}, the parameter {1} is not a valid decimal.  Please separate multiple numbers with commas.
_AP.Errors.ACP.Invaliddefaultnode=In Node {0}, the parameter {1} is an invalid node. You must select a valid node."

_AP.Errors.Confirm.Lost_changes=All {0} changes to the {1} will be lost.
_AP.Errors.Confirm.Lost_changes.##CONTEXT##=Placeholder {0} will be a count, placeholder {1} will be an object name.
_AP.Errors.Confirm.Remove=Are you sure you would like to remove this {0}?
_AP.Errors.Confirm.Remove.##CONTEXT##=Placeholder will be an object name.
_AP.Errors.Confirm.Notice_password=Notice: Storing a password is less secure.
_AP.Errors.Confirm.Delete_pv=Deleting this process variable will invalidate any expressions which use it.
_AP.Errors.Confirm.Deletion=Are you sure you want to delete?

_AP.Errors.Control.Sim_savepm=You must save the process model before you can save any simulations.
_AP.Errors.Control.Sim_saved=Simulation scenario saved.
_AP.Errors.Control.Norun_scenario=You cannot run this scenario since it has not yet been saved.
_AP.Errors.Control.Noretrieve_scenario=You cannot retrieve scenarios for an unsaved process model.
_AP.Errors.Control.Success_pm=You have successfully {0} the process.
_AP.Errors.Control.Success_pm.##CONTEXT##=Fill text is either: "paused", "resumed", "cancelled"
_AP.Errors.Control.Select_scenario=No simulation scenario has been selected.
_AP.Errors.Control.Cannotsave_folder=You cannot save in {0} folder.
_AP.Errors.Control.Select_pm=You must select a process model {0}.
_AP.Errors.Control.Select_pm.##CONTEXT##=Fill text is always: "to open"
_AP.Errors.Control.Cannotdelete_draft=You cannot delete the draft of the process model.
_AP.Errors.Control.No_permission=You do not have permission {0}.
_AP.Errors.Control.No_permission.##CONTEXT##=Fill text is always: "to delete this version"
_AP.Errors.Control.Opentoload_pm=You must first open a process model to load a version.
_AP.Errors.Control.Overwrite_draft=Any changes saved to this version will overwrite the current working draft.
_AP.Errors.Control.Cannotmove_topfolder=You cannot move items to the top level folder. Please choose another folder.
_AP.Errors.Control.Cannotmove_inside=You cannot move this folder inside itself.
_AP.Errors.Control.Selectimport_document=Please select a document before clicking Import.
_AP.Errors.node.Selectnodeinstance=Please select a node instance before clicking View Node Details.
_AP.Errors.Control.Select_task=Please select {0} task{1}.
_AP.Errors.Control.Selectactive_task=Please select {0} task{1} with an active schedule.
_AP.Errors.Control.Warning_sublink=WARNING:  The sub/link process {0}.  It is recommended to {1}.
_AP.Errors.Control.Unpub_pm=The process model has unpublished subprocesses which you do not have access to. They must be published before continuing.
_AP.Errors.Control.Unknown_node=Unknown node {0}.
_AP.Errors.Control.Unknown_node.##CONTEXT##=The placeholder is for the Node name
_AP.Errors.Control.Choose_foldoc=You must choose a folder or document to write to.
_AP.Errors.Control.Mapped_form=All form inputs are already mapped to node inputs.
_AP.Errors.Control.Notfound_file=This {0} file is not found on the server.
_AP.Errors.Control.Error_abstractmethod=Abstract Method Error.
_AP.Errors.Control.Samename_pv=Another process variable already has this name. Please choose a different one.
_AP.Errors.Control.Select_query=Please select a query to delete by clicking on a row.
_AP.Errors.Control.Invalid_index=Invalid index.
_AP.Errors.Control.Cannot_query=You cannot perform a * query.
_AP.Errors.Control.Singlequery_inrow=You should enter only a single query in a row.
_AP.Errors.Control.Oneselect_innode=You can only perform one select query in the current node.
_AP.Errors.Control.Empty_expression=The {0} expression is empty.
_AP.Errors.Control.Empty_note=You should not add an empty note.
_AP.Errors.Control.Exceeded_notes=The Note(s) limit has exceeded. You can not add more Note(s).
_AP.Errors.Control.Alreadyexists_var=A variable with the name {0} already exists.
_AP.Errors.Control.Select_item=You must select an item.
_AP.Errors.Control.Cannot_privatefolder=You cannot {0} your private folder.
_AP.Errors.Control.Cannot_privatefolder.##CONTEXT##=Fill text[1]: "rename", "delete"
_AP.Errors.Control.Select_folderorpm=You must select a folder or process model to move first.
_AP.Errors.Control.Specify_spawnexpression=Please specify the expression to spawn the number of node instances.
_AP.Errors.Control.Empty_maxnodeexpression=Expression that determines minimum number of node instances that should be executed before the process could move further is empty.
_AP.Errors.Control.Nopvtomap=Error: The current process does not have any process variables to map to.
_AP.Errors.Control.Select_row=Please select {0} row, and try again.
_AP.Errors.Control.Select_row.##CONTEXT##=Fill text[1]: "a mapping", "an output", "a condition or expression", the last one being internationalized as in row 150 of this sheet
_AP.Errors.Control.Success_jsp=This {0} file was validated successfully.
_AP.Errors.Control.Select_nodeinput=Please select a node input.
_AP.Errors.Control.Select_xml=Please select an xml file.
_AP.Errors.Control.Val_failed=Process model validation failed: the process model could not be published. Please review the errors in the message window.

_AP.Errors.DEFAULT.Text=The Process Model is invalid.

_AP.Errors.Doctotemplate.Templatenotspecified=Node {0} is missing the template.
_AP.Errors.Doctotemplate.Templatenotspecified.##CONTEXT##=The placeholder is for the Node name
_AP.Errors.Doctotemplate.Documentnamemissing=Node {0} is missing name for the new document to be created.
_AP.Errors.Doctotemplate.Foldermissing=Node {0} is missing folder for the new document to be created.
_AP.Errors.Doctotemplate.Overwritedocumentmissing=Node {0} is missing the document to overwrite.

_AP.Errors.Escalation.Invalidtime=Node {0} contains an escalation with an invalid escalation time: {1}.
_AP.Errors.Escalation.Norecipients=Node {0} contains a notification escalation with no recipients.
_AP.Errors.Escalation.Noreassignees=Node {0} contains a reassign escalation with no reassignees.

_AP.Errors.ExecuteRoboticProcess.IncorrectCs=Parameter Integration on Activity Class {2} on node {1} has an invalid value. The selected integration does not use an Appian RPA connected system.
_AP.Errors.ExecuteRoboticProcess.IncorrectIntegration=Parameter Integration on Activity Class {2} on node {1} has an invalid value. The selected integration does not use the Execute Robotic Process operation of the Appian RPA connected system.
_AP.Errors.ExecuteRoboticProcess.IntegrationDne=Parameter Integration on Activity Class {2} on node {1} has an invalid value. The selected integration does not exist or has been deleted.

_AP.Errors.Format.Excmaxchars_mssg=Message exceeds maximum number of characters.
_AP.Errors.Format.Min_chars=Please enter a name for the {0} that is a minimum of {1} characters.
_AP.Errors.Format.Enter_filename=You must enter a file name.
_AP.Errors.Format.Blank_name=The name cannot be left blank.
_AP.Errors.Format.Nospaces_element=The element name cannot include any spaces.
_AP.Errors.Format.No_path=Path has not been entered.
_AP.Errors.Format.Format_date={0} date should be formatted as {1}
_AP.Errors.Format.Format_time={0} time should be formatted as {1}
_AP.Errors.Format.Lowlimit_number=The number should be {0} or more.
_AP.Errors.Format.Lowlimit_numberof=The number of {0} should be {1} or more.
_AP.Errors.Format.Lowuplimit_numberof=The number of {0} should be {1} or more and less than {2}.
_AP.Errors.Format.Lowlimit_interval={0} interval should be greater than {1}.
_AP.Errors.Format.Lowlimit_whole_interval={0} interval should be a whole number greater than {1}.
_AP.Errors.Format.Lowlimit_whole_delay={0} should be a whole number {1} or more.
_AP.Errors.Format.Lowlimit_whole_delay.##CONTEXT##=Placeholder {1} is the lower limit for the number
_AP.Errors.Format.Monthly_interval=Monthly day should be between {0} and {1}.
_AP.Errors.Format.Monthly_interval.##CONTEXT##=Monthly day means the day number (1,2, 28, etc.)
_AP.Errors.Format.Invalid_monthday=Month day {0} is invalid for month {1}.
_AP.Errors.Format.Invalid_monthday.##CONTEXT##=Placeholder {0} is the day of the monthly but in this case an invalid number (e.g. 32) and {1} is the name of the month.
_AP.Errors.Format.Atleast_whole_interval={0} interval must be set to a whole number equal to or greater than {1}.
_AP.Errors.Format.Lowlimit_ocurrences=The number of occurrences should be a whole number greater than {0}.
_AP.Errors.Format.Validnumber_instances=Number of instances should be a valid integer greater than {0}.
_AP.Errors.Format.Name_alreadyinuse=The Activity Class Parameter name is already in use.
_AP.Errors.Format.Valid_value=Please enter a valid {0} for this value.
_AP.Errors.Format.Formatname_var=Variable names may only contain letters, numbers, and underscores.
_AP.Errors.Format.End_path=Path must end with {0}.
_AP.Errors.Format.Nochar_name=The {0} name cannot have a \'{1}\' character in it.
_AP.Errors.Format.Path_jsp=JSP path must be a path on the server and start with the forward slash \'/\' character.
_AP.Errors.Format.Yesno_pv=For \'Yes\' or \'No\' Process Variables, the value should be 1 for yes, 0 for no.
_AP.Errors.Format.Invalidname_acp=Invalid ACP Name \'{0}\'. ACPs must begin with a character and may only contain letters, numbers, and underscores.


_AP.Errors.Forms.Exportcollaberror=Form could not be exported to Folder
_AP.Errors.Forms.Importerrorbadfile=There was a problem in reading the forms file. Please check the format of file and try again.
_AP.Errors.Forms.Node_jsp_nopath=The JSP path for the form associated with Node {0} has not been specified for the site primary language: {1}.
_AP.Errors.Forms.Node_internal_nodocid=A valid document to be used for the form assiciated with Node {0} has not been specified for the site primary language: {1}.
_AP.Errors.Forms.Process_jsp_nopath=The JSP Path for the process start form has not been specified.
_AP.Errors.Forms.Process_internal_nodocid=You must provide a valid document to be used for the process start form.

_AP.Errors.IntegrationInformation.MappingsDeleted={1}: Rule input {2} ({3}) has been removed.
_AP.Errors.IntegrationInformation.IntegrationDeleted={1}: Error occurred while loading the {2} integration.

_AP.Errors.InterfaceInformation.MappingsTypeChange={1}: Rule input {2} ({3}) is currently mapped to a {4} of type {5}.
_AP.Errors.InterfaceInformation.MappingsDeleted={1}: Rule input {2} ({3}) has been removed.
_AP.Errors.InterfaceInformation.InterfaceDeleted={1}: Error occurred while loading the {2} interface.

_AP.Errors.Lane.Noassignees=Assignment for lane {0} is attended and does not have any assignees declared.
_AP.Errors.Lane.Noassignees.##CONTEXT##=The placeholder is for the lane name
_AP.Errors.Lane.Invalidrunas=Assignment for lane {0} can either be attended or unattended.  Please choose one.
_AP.Errors.Lane.Invalidrunas.##CONTEXT##=The placeholder is for the lane name

_AP.Errors.Node.Invalidhtmlform=This is not a valid HTML form.
_AP.Errors.Node.Invalidpdfform=This is not a valid PDF form.
_AP.Errors.Node.Noexitflowerror=Node {0} does not have an exit flow.  This node must have an exit flow.
_AP.Errors.Node.Noexitflowwarning=Node {0} does not have an exit flow.  If no flows or events are active after this node completes, the process will be paused by exception.
_AP.Errors.Node.Noexitflowwarningepex=Node {0} does not have an exit flow. When the node completes, the flow will end.
_AP.Errors.Node.Noexitflowonstartnodewarning=Node {0} does not have an exit flow.
_AP.Errors.Node.Noinflows=Node {0} does not have incoming flows.  End events and Logical nodes must have incoming flows.
_AP.Errors.Node.Flowfromend=There is a connection from an end event to node {0}.  No flows are allowed to leave an end event.
_AP.Errors.Node.Toomanyexitflows=Node {0} does not allow for more than one exit flow.
_AP.Errors.Node.Toomanyinflows=Node {0} does not allow for more than one incoming flow.
_AP.Errors.Node.Floatingflow=Node {0} has an exit flow that does not connect to another valid node.  Please remove this flow.  Invalid node GUI Id is {1}
_AP.Errors.Node.Flowtostart=There is a connection from a node to start event {0}.  No flows are allowed to enter a start event.
_AP.Errors.Node.Missingmessageproperty=Property {0} must be defined for node {1}.
_AP.Errors.Node.Missingmessageproperty.##CONTEXT##=The first placeholder is the name of the property
_AP.Errors.Node.Reservedmessageproperty=Property {0} must not be defined for node {1}. Property {0} is reserved.
_AP.Errors.Node.Duplicatemessageproperty=Property {0} must be defined only once for node {1}.
_AP.Errors.Node.Missingdestination=A destination must be defined for node {0}.
_AP.Errors.Node.Messagepropertynameempty=Property mapping does not contain a name for node {1}. All property mappings must contain a name.
_AP.Errors.Node.Invalid=The node does not exist.
_AP.Errors.Node.Invalidmessagepropertyname=Property name {0} for node {1} invalid.  Property names may only contain letters, numbers, and underscores, and must start with a letter
_AP.Errors.Node.Invalidruleconditions=Node {0} must have at least one condition or expression
_AP.Errors.Node.Invalidruleexpression=Node {0} expressions cannot be blank.
_AP.Errors.Node.Invalidbooleanrule=Node {0} cannot have blank boolean conditions.
_AP.Errors.Node.Noname=The process model contains a node without a name in the site primary language: {0}.
_AP.Errors.Node.Nulldelayflowuntil=Node {0} must have non-null absoluteExpression if timer is scheduled to be activated after date and time specified by expression
_AP.Errors.Node.Nulldelayflowfor=Node {0} must have non-null relativeInterval and numeric non-null fields if timer is scheduled to be activated after specified delay of time
_AP.Errors.Node.Unsupportedscheduletype=Node {0} has an unsupported schedule type.
_AP.Errors.Node.Invalidacpid=One of the Activity Class Parameters in this model references an invalid schema id.
_AP.Errors.Node.Unknownpublisherror=An error occured when publishing this model.
_AP.Errors.Node.Missingintervalhoursinfo=Node {0} must have either valid non-null integer intervalHours or intervalHours Expression if recurrence is set to \"At an interval\".
_AP.Errors.Node.Missingintervalminutesinfo=Node {0} must have either valid non-null integer intervalMinutes or intervalMinutes Expression if recurrence is set to \"At an interval\".
_AP.Errors.Node.Missingscheduleinfo=Node {0} has no schedule information.
_AP.Errors.Node.Missingdailysdaysinfo=Node {0} must have value for day interval.
_AP.Errors.Node.Missingtimeinfo=Node {0} must have either valid non-null integer Time or Time Expression for Recurring Interval.
_AP.Errors.Node.Missingweeklyinfo=Node {0} must have either valid non-null integer weekInterval or weekInterval Expression if recurrence is set to weekly.
_AP.Errors.Node.Missingmonthlyinfo=Node {0} must have either valid non-null integer monthInterval or monthInterval Expression if recurrence is set to monthly.
_AP.Errors.Node.Missingmonthlydayofmonthinfo=Node {0} must have either valid non-null integer dayOfMonth or dayOfMonth Expression if recurrence is set to monthly.
_AP.Errors.Node.Missingyearlyinfo=Node {0} must have either valid non-null integer dayOfMonth or dayOfMonth Expression if recurrence is set to Yearly.
_AP.Errors.Node.Nullrecurrencetype=Node {0} must have non-null Interval Type if Timer Recurrence option is selected.
_AP.Errors.Node.Escalationsscheduleerror=Node {0} has invalid values for timer {1}. {2}
_AP.Errors.Node.Escalationsscheduleerror.##CONTEXT##=Placeholder {0} is the node name, {1} is the event trigger name, {2} is the error message.
_AP.Errors.Node.Escalationsmessageerror=Node {0} has invalid values for message {1}. {2}
_AP.Errors.Node.Escalationsmessageerror.##CONTEXT##=Placeholder {0} is the node name, {1} is the message name, {2} is the error message.
_AP.Errors.Node.Starteventnoname=Node {0} contains an event without a name.
_AP.Errors.Node.Starteventtimer=Node {0} has invalid values for timer for {1}. {2}
_AP.Errors.Node.Starteventtimer.##CONTEXT##=Placeholder {0} is the node name, {1} is the event name, {2} is the error message.
_AP.Errors.Node.Starteventrule=Node {0} has invalid values for rules for {1}. {2}
_AP.Errors.Node.Starteventparamnotmapped={0} event on {1} has no output mapping for required process parameter mapping: {2}.
_AP.Errors.Node.Endeventnoname=Node {0} contains an event without a name.
_AP.Errors.Node.Endeventmessageproperties=Node {0} has invalid values for message properties for {1}. {2}
_AP.Errors.Node.Exceptioneventnoname=Node {0} contains an event without a name.
_AP.Errors.Node.Exceptioneventtimer=Node {0} has invalid values for timer for {1}. {2}
_AP.Errors.Node.Exceptioneventtimer.##CONTEXT##=Placeholder {0} is the node name, {1} is the event name, {2} is the error message.
_AP.Errors.Node.Exceptioneventrule=Node {0} has invalid values for rules for {1}. {2}
_AP.Errors.Node.Noexceptionflow=Node {0} has exception triggers and does not have an exception flow.
_AP.Errors.Node.Invalidexceptionflow=Node {0} has an invalid exception flow. Node without exception events cannot have exception flow.
_AP.Errors.Node.Noincomingflow=*This node does not have at least one incoming flow defined.
_AP.Errors.Node.Nooutgoingflow=*This node does not have at least one outgoing flow defined.
_AP.Errors.Node.Cannot_set_mni_from_assignees=Cannot run one instance of {0} for each assignee, because the node is unattended.
_AP.Errors.Node.Mni_invalid_pv_reference=The multiple instance value in node {0} references a process variable that does not exist.
_AP.Errors.Node.Mni_invalid_pv_type=The multiple instance value in node {0} references a process variable that is not of correct type.
_AP.Errors.Node.Mni_non_multiple_pv=The multiple instance value in node {0} references a process variable that is not a process variable that can hold multiple values.
_AP.Errors.Node.Invalid_relative_deadline={0}: The relative deadline must be either an expression or a non-negative integer.
_AP.Errors.Node.Invalid_absolute_deadline={0}: The absolute deadline must be an expression.
_AP.Errors.Node.Duplicatecustomparamnames=Node {0} cannot have duplicate names for node inputs: {2}
_AP.Errors.Node.Recursiveflow=Two or more nodes are in a loop and will not be started.
_AP.Errors.Node.Invalideventdestination=Error: {0}

_AP.Errors.Node.Invalidname=Invalid name \'{0}\' for node: {1}.
_AP.Errors.Node.Invaliddispname=Invalid display name \'{0}\' for node: {1}
_AP.Errors.Node.Complexwsdl=The requested Web Service operation is unsupported.
_AP.Errors.Node.Onlyexpressions=You must either clear this field or use an expression to set the value of a field of {0}.
_AP.Errors.Node.Invalidconnection=The node {0} has an invalid connection.


_AP.Errors.PM.Toomanystart=This process model has {0} start events.  Only one start event is allowed per model.
_AP.Errors.PM.Noname=The process model must have a valid name in the site primary language: {0}.
_AP.Errors.PM.Noprocessname=The process model must have a valid process display name in the site primary language: {0}.
_AP.Errors.PM.Completion=The value of Target Completion for this process model is invalid. Please enter a positive number.
_AP.Errors.PM.Noend=This model must contain at least one end event.
_AP.Errors.PM.Nogrowner=This process model does not have a group owner, please define one.
_AP.Errors.PM.Shouldbepublicforemail=Node {0} contains a trigger that receives an e-mail message. To receive email messages, this Process Model should be made public.
_AP.Errors.PM.Nofolder=You must choose a folder to save this process model in.
_AP.Errors.PM.Importerrordocnotfound=The import failed, Document does not exist
_AP.Errors.PM.Importerror=An error has occurred while importing this model
_AP.Errors.PM.Exporterrorcollab=Process Model could not be exported to Folder
_AP.Errors.PM.Exporterrornoperm=You do not have write privileges to specified folder
_AP.Errors.PM.Exporterrorinvalidfolder=The folder you are trying to export to is invalid
_AP.Errors.PM.Exporterrorinvalidpm=The Process Model seems to be corrupt
_AP.Errors.PM.Exporterrorfileio=There was a problem in downloading the export file
_AP.Errors.PM.Exporterrorcreatefile=There was a problem in creating the export file
_AP.Errors.PM.Invalidsubprocessmodel=The subprocess model in node {0} is invalid: {2}
_AP.Errors.PM.Invalid=Unable to locate the process model. It may have been deleted.
_AP.Errors.PM.Invalidpalette=Palette does not exist.
_AP.Errors.PM.Invalidpriority=A priority specified in the process or process model is invalid.
_AP.Errors.PM.Invaliduser=The Process Model contains a reference to an invalid user: {0}
_AP.Errors.PM.Invalidversion=The process model version does not exist. It may have been deleted.
_AP.Errors.PM.Invalidtype=A required data type for this process model ({0}) cannot be found. Please create the type and try importing again.
_AP.Errors.PM.Invalid_relative_deadline=The relative deadline for the process must be either an expression or a non-negative integer.
_AP.Errors.PM.Invalid_absolute_deadline=The absolute deadline for the process must be an expression.
_AP.Errors.PM.Importerrorbadfile=There was a problem in reading the Process Model file. Please check the format of file and try again.
_AP.Errors.PM.Exportstoragelimit=There is no space available in your allocated user storage space to upload the file.
_AP.Errors.PM.Invalidsubprocess=This process model contains subprocesses that are invalid. The process model cannot be published until the following subprocesses are valid: {0}
_AP.Errors.PM.Noviewpermissionsforsubprocess=This process model contains subprocesses that are unpublished. You do not have access to view these process models.
_AP.Errors.PM.Nopublishpermissionsforsubprocess=This process model contains subprocesses that are unpublished. You do not have access to publish the following process models: {0}. This process model cannot be published until these process models are published by users with access to do so.
_AP.Errors.PM.Notifiedownerofsubprocess=This process model contains the following subprocesses which were also published: {0}. Owners of these subprocesses have been notified.
_AP.Errors.PM.Notifiedparentsofsubprocess=This process model\'s subprocesses were contained within the following process models which were affected by your changes: {0}. Owners of these process models have been notified.
_AP.Errors.PM.Validationgeneric=Error: {0}
_AP.Errors.PM.Noalertrecipients=Please provide at least one recipient for sending error alerts.
_AP.Errors.PM.Nopermissionsonexistingmodel=This process model has already been imported, but you do not have permission to overwrite it. You may save your copy as a separate process model.
_AP.Errors.PM.Invalidnamecomma=The process model cannot have a \',\' in its name.
_AP.Errors.PM.Invalidnameslash=The process model cannot have a \'/\' in its name.
_AP.Errors.PM.Invalidnamegt=The process model cannot have a \'>\' in its name.
_AP.Errors.PM.Invalidnamelt=The process model cannot have a \'<\' in its name.
_AP.Errors.PM.Invaliduuid=An earlier version of this process model already exists, but you do not have permission to save over it. Please use the \'Save As\' command to save your changes to a new model
_AP.Errors.PM.Invalidreferences=Some referenced items could not be found. Please check the model and correct any problems.

_AP.Errors.PM.Pvnotonform=The variable {0} is a required parameter. It must be mapped to a form element on the process start form for every enabled language.
_AP.Errors.PM.Insufficientprivileges=You do not have sufficient privileges for this Process Model.
_AP.Errors.PM.Custom_node_removed={0} is an unregistered custom Smart Node and has been removed from the process model.
_AP.Errors.PM.Security_warning=*Process Model must be public for e-mail messages to be received.

_AP.Errors.Process.Viewprocessdiagram=The process diagram could not be opened. {0}
_AP.Errors.Process.Lockedcantoverride=The lock on the process diagram cannot be overriden. {0}
_AP.Errors.Process.Lockedcanoverride=The lock on the process diagram can be overriden. {0}
_AP.Errors.Process.Addattachment=The attachment could not be added. {0}
_AP.Errors.Process.Removeattachment=The attachment could not be removed. {0}
_AP.Errors.Process.Addnote=The note could not be added. {0}
_AP.Errors.Process.Editnote=The note could not be edited. {0}
_AP.Errors.Process.Removenote=The note could not be removed. {0}
_AP.Errors.Process.Updateprocessvariables=The process variables could not be removed. {0}
_AP.Errors.Process.Saveprocessdiagram=The process could not be saved. {0}
_AP.Errors.Process.Noteslimit=The limit of notes has been reached.
_AP.Errors.Process.Invalidtask=The task does not exist.
_AP.Errors.Process.Invalidnote=The note does not exist.
_AP.Errors.Process.Invalidescalation=The escalation does not exist.
_AP.Errors.Process.Attachmentslimit=The limit of attachments has been reached.
_AP.Errors.Process.Insufficientprivileges=You do not have sufficient privileges to perform this action on the process.
_AP.Errors.Process.Invalidfolder=The folder does not exist.
_AP.Errors.Process.Invalidstate=The process is in a state which does not allow the attempted action.
_AP.Errors.Process.Modifynode=The task could not be modified. {0}
_AP.Errors.Process.Viewinflightpermissions=You do not have permissions to view this process in flight
_AP.Errors.Process.Insufficientprivilieges=You do not have sufficient privileges to view the Process.

_AP.Errors.Rdbms.Invalidstatement=Invalid statement: {0}.
_AP.Errors.Rdbms.Invalidstatement.##CONTEXT##=An invalid statement for a SQL database
_AP.Errors.Rdbms.Invalid_connection=There was a problem in connecting to database. {0}
_AP.Errors.Rdbms.Invalid_query=The SQL Query is invalid, {0}
_AP.Errors.Rdbms.Missingusername=Node {0} is missing required Username.
_AP.Errors.Rdbms.Missingpassword=Node {0} is missing required Password
_AP.Errors.Rdbms.Missingurl=Node {0} is missing required Connection Url
_AP.Errors.Rdbms.PredefinedDatasourceNotFound=Node {0} references an invalid pre-defined data source {2}.
_AP.Errors.Rdbms.PredefinedDatasourceNotFound.##CONTEXT##=Placeholder {0} is the name for the node, placeholder {2} is the name of the datasource.
_AP.Errors.Rdbms.NoPredefinedDatasourceSelected=A pre-defined data source must be selected.
_AP.Errors.Rdbms.Unsuported_arv=The database returned ARV\'s that may not be supported. Message: {0}
_AP.Errors.Rdbms.Invalid_column_name=The Column name {0} is invalid. Please use \'as\' clause with function calls

_AP.Errors.Recurrence.Skip=Unable to skip recurrence: {0}.
_AP.Errors.Recurrence.Trigger=Unable to trigger recurrence: {0}.

_AP.Errors.Schedule.Generic=Node {0} has invalid values for schedule. {1}
_AP.Errors.Schedule.Invalidschedulestartdate=Node {0} has invalid value for Date in Schedule Start.
_AP.Errors.Schedule.Invalidschedulestarttime=Node {0} has invalid value for Time in Schedule Start.
_AP.Errors.Schedule.Invalidexpressionfordatetime=Node {0} can not have empty value for Date and Time Expression.
_AP.Errors.Schedule.Relativetime=Node {0} contains an invalid relative schedule time for {1}.  This value must be a non-negative integer.
_AP.Errors.Schedule.Invalidtrueexpression=Node {0} has empty value for expression when \"Repeat until: Expression is true\" is selected.
_AP.Errors.Schedule.Invaliddatetimeexpression=Node {0} has invalid value for DateTime expression when \"Repeat until: DateTime Expression\" is selected.
_AP.Errors.Schedule.Trigger=Unable to trigger schedule: {0}.

_AP.Errors.Sendemail.Unspecifiedtoccbcc=Node {0} has unspecified To, Cc and Bcc fields. Please specify at-least one of them.
_AP.Errors.Sendemail.Templatenotspecified=Node {0} is missing the template.
_AP.Errors.Sendemail.Templatenotspecified.##CONTEXT##=The placeholder is for the Node name
_AP.Errors.Sendemail.HtmlTextTooLong={0}: Message body exceeds the maximum number of characters that is allowed ({1} characters)
_AP.Errors.Sendemail.Required=Parameter {0} on Activity Class {1} on node {2} requires a value.  Since this node is unattended, you must enter a value during design.

_AP.Errors.WriteRecords.AutomationTypeDisplayName=Automation Type
_AP.Errors.WriteRecords.EventTypeDisplayName=Event Type
_AP.Errors.WriteRecords.NullInput=Invalid Setup configuration for the node {0}. The "{1}" input cannot be null.
_AP.Errors.WriteRecords.NullEventAttributeInput=Invalid Setup configuration for the node {0}. There is no field mapped for "{1}".
_AP.Errors.WriteRecords.NullOnlyWhenCondition=Invalid Setup configuration for the node {0}. The "Only when..." condition cannot be null.

_AP.Errors.ServerAdministratorConfiguration.PushNotificationsDisabled=Push Notifications have been disabled by an administrator and will not be sent. Enable them via the Mobile tab in Admin Console.

_AP.Errors.Sim.Toomany=Unable to save simulation. Too many instances.

_AP.Errors.Variable.Invalidtype=The process variable has an invalid type.  Please select a concrete type for this variable.
_AP.Errors.Variable.Duplicatename=There are more than one process variables with the same name - {0}.  Please change the names so that each variable has a unique name.
_AP.Errors.Variable.Invalidexpression=There was an error in an expression in {2} at {3} : {4}
_AP.Errors.Variable.Invalidexpression.##CONTEXT##=Placeholder {2} is the node name.  {3} will be an expression.  {4} will be the error.
_AP.Errors.Variable.Invalidnumber=Process variable {0} is not a valid number.
_AP.Errors.Variable.Invalidnumber_multiple=Process variable {0} is not a valid number. Please separate multiple numbers with commas.
_AP.Errors.Variable.Invaliddecimal=Process variable {0} is not a valid decimal.
_AP.Errors.Variable.Invaliddecimal_multiple=Process variable {0} is not a valid decimal. Please separate multiple numbers with commas.
_AP.Errors.Variable.Nonsyncedtype=The process variable has an invalid type. Please select a record type with data sync enabled.

_AP.Errors.WS.Methodnone=The Web Service node {0} has no service method selected.
_AP.Errors.WS.Methodnone.##CONTEXT##=The placeholder is for the node name