#Auto-generated file
#Wed Nov 24 13:08:07 EST 2021
_PM.Schedule.ScheduledStart=Scheduled Start
_PM.Escalations.Lower=Lower
_PM.Toolbar.ShowFontPalette=Show Font Palette
_PM.Common.Operator=Operator
_PM.Decision.ElseIfNoRulesAreTRUE=Else if no rules are TRUE
_PM.Menu.Escalations=Escalations
_PM.Schedule.MonthlyTimeShouldBeFormattedAs=Monthly time should be formatted as
_PM.NodeEventTypes.MessageProducer=Send Message
_PM.RulesGrid.ValueMustBeADecimal=Value must be a decimal
_PM.Menu.TurnSnapOff=Turn Snap Off
_PM.General.AllowAnyoneToFireTriggers=Allow anyone to fire triggers.
_PM.Tabs.Triggers=Triggers
_PM.Schedule.WeeklyTimeShouldBeFormattedAs=Weekly time should be formatted as
_PM.NodeDesc.NodeProperties=Node Properties
_PM.Common.Setup=Setup
_PM.Common.Parameter=Parameter
_PM.Menu.NewProcessModel=New Process Model
_PM.General.ProcessPriority=Process Priority
_PM.Schedule.RecurringTimerEscalation=Recurring Timer Escalation
_PM.NodeEvents.EventProperties=Event Properties
_PM.Tabs.CreatesAPotentiallyRecursiveRelationship=WARNING\: The sub-process creates a potentially recursive relationship. It is recommended to remove this sub-process, or alter the sub-process itself.
_PM.General.ProcessDisplayName=Process Display Name
_PM.Menu.ResumeProcess=Resume Process
_PM.RulesGrid.NoOutputsFound=No outputs found
_PM.NodeEvents.ProcessOnlyIfConditionsAreTrue=process only if conditions are true
_PM.Tabs.MessageExceedsMaximumNumberOfCharacters=Message exceeds maximum number of characters.
_PM.Tabs.ChangePriority=Change Priority
_PM.NodeEvents.SendEventInfo=When you enter a receive message event, all running instances of the process model will receive the message. This can have negative performance impacts, and is not commonly used as a result. Instead, target specific processes by entering their IDs in the DestinationProcessID field on the Data tab.
_PM.Tabs.Errors=Errors
_PM.NodeEvents.ChangingTheJMSTopic=Changing the JMS topic may change the message type and clear all mappings. Are you sure you want to do this?
_PM.Context.AddLane=Add Lane
_PM.ValidationError.GuidanceDatatypesPassedByReference=Subprocess nodes pass custom data types by reference. Consider not passing the data type by reference and instead updating the value with an output variable. Passing data types by reference can cause issues with long-lived processes. Nodes\: {0}.
_PM.General.By=by
_PM.Context.LaneProperties=Lane Properties
_PM.Scope.Escalation=Escalation
_PM.NodeEventTypes.ErrorTrigger=Error
_PM.Common.Order=Order
_PM.Data.ResultProperties=Result Properties
_PM.Tabs.ProcessHistory=Process History
_PM.Schedule.Hours=Hour(s)
_PM.Scope.Scheduling=Scheduling
_PM.Tabs.CurrentTasks=Current Tasks
_PM.Tabs.ClickSubmitToChangeThePriorityImmediately=Click submit to change the priority immediately.
_PM.Decision.IncomingPaths=Incoming Path(s)
_PM.Common.Open=Open
_PM.Toolbar.ProcessDetails=Process Details
_PM.Menu.SaveAndPublish=Save &amp; Publish
_PM.Tabs.AlertMessage=Alert Message
_PM.Schedule.FollowExceptionFlow=Follow Exception Flow
_PM.Tabs.YouMustEnterRecipientsForThisAlert=You must enter recipients for this alert.
_PM.Scope.Expression=Expression
_PM.Toolbar.ChooseProcessMode=Choose Process Mode
_PM.General.TimeZone=Time Zone
_PM.Decision.Execute1OrMoreOutgoingPaths=Execute 1 or more outgoing path(s)
_PM.Toolbar.Select=Select
_PM.NodeEvents.SaveReceivedContentToProcessVariables=Save received content to process variables
_PM.Weeks.Saturday=Saturday
_PM.Scope.Timer=Timer
_PM.Escalations.AddEscalation=Add Escalation
_PM.Tabs.General=General
_PM.NodeEvents.OptionalTextInstructions=Specify additional text for the message body
_PM.Context.DisableActivityChaining=Disable Activity Chaining
_PM.Context.Above=Above
_PM.Months.February=February
_PM.Escalations.ThisEscalationIsConfiguredToSendANotification=This escalation is configured to send a notification, but no recipients have been specified.
_PM.Toolbar.ToggleNodeStatistics=Toggle Node Statistics
_PM.NodeEvents.JMSMessageDestination=JMS Message Destination
_PM.Scope.GroupOwner=Group Owner
_PM.Months.August=August
_PM.Menu.EnhancedView=Enhanced View
_PM.Timer.TimerConditions=Timer Conditions
_PM.Tabs.Alerts=Alerts
_PM.Toolbar.DesignerView=Designer View
_PM.Menu.Close=Close
_PM.Escalations.ThisEscalationWasTriggeredOn=This escalation was triggered on
_PM.Messages.Info=info
_PM.Escalations.PleaseSpecifyAnEscalationDelay=Please specify an escalation delay.
_PM.Tabs.ProcessNodes=Process Nodes
_PM.Context.Recommendations=Recommendations
_PM.Decision.OutgoingPaths=Outgoing Paths
_PM.Schedule.DaysSmall=day(s)
_PM.Common.Result=Result
_PM.Toolbar.ZoomOut=Zoom Out
_PM.Tabs.SaveNewVersion=Save New Version
_PM.Tabs.FlowProperties=Flow Properties
_PM.Months.December=December
_PM.Decision.Of=of
_PM.Tabs.TheMaximumNumberOfTabs=The maximum number of tabs has already been reached. Please close some tabs before continuing.
_PM.Menu.Undo=Undo
_PM.Schedule.InstancesHaveStarted=instances have started
_PM.Menu.GenerateDocumentation=Generate Documentation
_PM.General.ProcessDisplayNameInstructions=The name of the process as it appears to users after a process of this model has been started.
_PM.Escalations.TriggerEscalation=Trigger Escalation
_PM.Menu.RemoveLane=Remove Lane
_PM.Schedule.TimerEscalationActivation=Timer Escalation Activation
_PM.Escalations.TheTimerEventWhichWillActiveThisEscalation=The Timer Event which will active this escalation
_PM.Context.EscalationProperties=Escalation Properties
_PM.Schedule.Minutes=Minute(s)
_PM.Common.Type=Type
_PM.Menu.CancelProcess=Cancel Process
_PM.NodeDesc.AllowUsersToStepBack=Allow users to step back to the start node from the next chained activity
_PM.Menu.AddHorizontalLane=Add Horizontal Lane
_PM.Schedule.MonthsSmall=month(s)
_PM.Schedule.Options3rd=3rd
_PM.Context.EditStartProcessModel=Edit Start Process Model
_PM.NodeEvents.MessageDestinations=Message Destinations
_PM.Schedule.AfterActivationOfTheTimerEvent=after activation of the timer event
_PM.RulesGrid.NoEnumerationValues=No enumeration values
_PM.Schedule.ExpressionIsTrue=Expression is true
_PM.Escalations.Escalations=Escalations
_PM.Menu.HideNodeMetrics=Hide Node Metrics
_PM.Tabs.Attachments=Attachments
_PM.Schedule.Monthly=Monthly
_PM.General.SubProcessesUseParent=Sub-processes use the parent process\u2019 time zone
_PM.General.YouMustEnterPMName=You must enter a valid process model name.
_PM.Common.OpenTheExpressionEditor=Open the Expression Editor
_PM.Tabs.Mapping=Mapping
_PM.Tabs.NewNodeInput=New Node Input
_PM.Tabs.AssociationProperties=Association Properties
_PM.General.ProcessModelName=Process Model Name
_PM.Menu.Modify=Modify
_PM.RulesGrid.NewCondition=New Condition
_PM.Escalations.TimerEvent=Timer Event
_PM.ValidationError.ProcessModelSaved=The process model has been saved. Dismissed recommendations will reappear the next time you open this model, unless you Save & Publish.
_PM.Common.Value=Value
_PM.Scope.Subprocess=Subprocess
_PM.Months.May=May
_PM.Weeks.Friday=Friday
_PM.Weeks.Wednesday=Wednesday
_PM.ValidationError.GuidanceGatewayTooManyIncomingFlows=Gateway nodes in a loop have more than one incoming flow. Place a script task in front of each of these gateway nodes to merge incoming flows. Nodes\: {0}.
_PM.Weeks.Monday=Monday
_PM.Variables.RemoveProcessVariable=Remove Process Variable
_PM.Escalations.EscalationTimeMustBeANonNegative=Escalation time must be a non-negative whole number.
_PM.Common.Description=Description
_PM.Escalations.AreYouSure=Are you sure you would like to remove this escalation?
_PM.Schedule.ExecuteWhenTheNodeIsActivatedByTheSystem=Execute when the node is activated by the system.
_PM.Escalations.EscalationDateCannotBeLeftBlank=Escalation date cannot be left blank.
_PM.NodeDesc.HelpLine2=Name only appears in the process modeler. Description and Task Display Name are what the end user of the process see.
_PM.Variables.NoValue=No Value
_PM.NodeDesc.HelpLine1=Use the form on the left to describe basic information about this node.
_PM.Tabs.ProcessInstances=Process Instances
_PM.Schdeule.TwelveAM=12\:00 AM
_PM.Toolbar.EditProcessView=Edit Process View
_PM.Escalations.PleaseSpecifyAnExpression=Please specify an expression.
_PM.Menu.ShowHideMessagesWindow=Show or Hide Messages Window
_PM.Menu.HideMessages=Hide Messages
_PM.Tabs.SomeoneIsAlreadyEditing=Someone Is Already Editing
_PM.Tabs.ChangeDeadline=Change Deadline
_PM.Escalations.WhatActionShouldBeTaken=What action should be taken?
_PM.Weeks.Sunday=Sunday
_PM.NodeEvents.ChangingTheMessageType=Changing the message type will clear all rules and output expressions. Are you sure you want to do this?
_PM.NodeDesc.ActivityChaining=Activity Chaining
_PM.Tabs.LimitReached=Limit reached
_PM.Decision.IfNoneOfTheAboveRulesAreTRUE=If none of the above rules are TRUE
_PM.Decision.OneOrMorePathsCanExitAnORGateway=1 or more paths can exit an OR gateway
_PM.Tabs.LoadingNewVersionWillCause=Loading the new version will cause all unsaved changes to be lost. Do you wish to continue?
_PM.Tabs.Setup=Setup
_PM.Decision.ExecuteAllOutgoingPathsAtTheSameTime=Execute all outgoing paths at the same time
_PM.Data.ExpressionProperties=Expression Properties
_PM.Escalations.SkipEscalation=Skip Escalation
_PM.RulesGrid.ProcessVariable=Process Variable
_PM.Decision.GoTo=go to
_PM.Toolbar.AnalystView=Analyst View
_PM.Toolbar.ProcessInstances=Process Instances
_PM.Context.Left=Left
_PM.Lane.Height=Height
_PM.RulesGrid.MultipleQuestion=Multiple?
_PM.Common.Message=Message
_PM.Toolbar.HideFontPalette=Hide Font Palette
_PM.Toolbar.NewProcess=New Process
_PM.Tabs.ParentProcessWarning=Parent Process Warning
_PM.Escalations.priorityByASingleLevel=priority by a single level
_PM.Common.Remove=Remove
_PM.Tabs.ContinueEditing=Continue Editing
_PM.Menu.Versions=Versions...
_PM.Lane.Color=Color
_PM.Schedule.Of=of
_PM.General.EmailAttachmentsFolderInstructions=The folder into which e-mail attachments sent to this Process Model will be placed.
_PM.Tabs.ProcessDetails=Process Details
_PM.Schedule.EscalateAtTheDateAndTimeSpecifiedByThisExpression=Escalate at the date and time specified by this expression
_PM.Common.Required=Required
_PM.Schedule.OfEvery=of every
_PM.NodeEvents.MessageType=Message Type
_PM.NodeEventTypes.Default=Undefined Event
_PM.Common.Start=Start
_PM.Tabs.Recurrence=Recurrence
_PM.Menu.Messages=Messages
_PM.Tabs.DataSmall=data
_PM.Tabs.EditProcessVariable=Edit Process Variable
_PM.Decision.Flows=Flows
_PM.Tabs.ProcessModelProperties=Process Model Properties
_PM.Tabs.Load=Load
_PM.RulesGrid.ImportCustomProperties=Import Custom Properties
_PM.Decision.PathLabel=Path Label
_PM.Menu.SaveNewVersion=Save New Version
_PM.Decision.DefineAndOrder=Define and Order
_PM.RulesGrid.AConditionOrExpression=a condition or expression
_PM.Decision.Require=Require
_PM.General.PublicEvents=Public Events
_PM.Tabs.Versions=Versions
_PM.Escalations.Raise=Raise
_PM.Tabs.Scheduling=Scheduling
_PM.Tabs.SubProcesses=Sub-Processes
_PM.Tabs.Lane=Lane
_PM.Common.Edit=Edit
_PM.NodeEvents.EventConditions=Event Conditions
_PM.NodeEvents.ExceptionEventTriggers=Exception Event Triggers
_PM.Variables.HelpText=Configure your process variables below. To add a new variable click on the \u2019Add Variable\u2019 button. To edit a variable click on the corresponding row to bring up an form to change the variables values. To delete a variable, click on the remove button.
_PM.Toolbar.ToggleGridlines=Toggle Gridlines
_PM.Common.New=New
_PM.General.OverrideWithTheInitiators=Override with the initiator\u2019s time zone.
_PM.Schedule.WeeksOn=week(s) on
_PM.Months.January=January
_PM.Lane.Name=Name
_PM.Tabs.SaveAs=Save As
_PM.Escalations.Escalation=Escalation
_PM.Menu.TurnSnapOn=Turn Snap On
_PM.Schedule.Daily=Daily
_PM.Toolbar.ActivityExceptions=Activity Exceptions
_PM.Schedule.Days=Day(s)
_PM.Schedule.DailyTimeShouldBeFormattedAs=Daily time should be formatted as
_PM.Common.Name=Name
_PM.Escalations.ReassignTaskTo=Reassign task to
_PM.Toolbar.Validate=Validate
_PM.Menu.Save=Save
_PM.Menu.Validate=Validate
_PM.Common.PleaseWait=Please Wait
_PM.Tabs.DataManagement=Data Management
_PM.Timer.TimerInstructions=Timer will fire only if all conditions are true
_PM.NodeEventTypes.ErrorProducer=Error
_PM.Context.Forms=Forms
_PM.Schedule.SchedulingHelp=By default, nodes are kicked off as soon as the node becomes active. You can override the default by scheduling an absolute, relative, or recurring time to initiate the node.
_PM.Messages.Dismiss=Dismiss
_PM.ValidationError.GuidanceTooManyNodes={0} process nodes detected. Consider splitting this process into smaller subprocesses. Having more than 50 nodes can complicate maintainability and lead to higher memory consumption.
_PM.NodeEvents.ConfigureThisEvent=Configure this Event
_PM.Escalations.EscalationsHelp=Use escalations to determine how a node is handled when escalated by a process administrator. Escalations are optional. Click the \u201CAdd Escalation\u201D button to customize an escalation.
_PM.RulesGrid.EnterAnExpression=Enter an expression
_PM.NodeEvents.ProcessToProcess=Process to Process
_PM.Menu.Paste=Paste...
_PM.Scope.Forms=Forms
_PM.Tabs.Configure=Configure
_PM.Scope.Rule=Rule
_PM.Schedule.Every=Every
_PM.NodeEvents.MessageContent=Message Content
_PM.NodeEvents.OptionalText=Optional Text
_PM.Escalations.ConfigureTheTimerEvent=Configure the Timer Event to activate escalation
_PM.NodeEvents.AddEvent=Add Event
_PM.Menu.BPMNView=BPMN View
_PM.Schedule.MinutesSmall=minute(s)
_PM.Tabs.CannotOpenANodeDialogAsNoNodeIsSelected=cannot open a node dialog as no node is selected
_PM.Menu.NodeMetrics=Node Metrics
_PM.Decision.OneOrMorePathsCanEnterAnANDGateway=1 or more paths can enter an AND gateway
_PM.Schedule.TimerRecurrence=Timer Recurrence
_PM.Months.September=September
_PM.NodeEvents.StartEventTriggers=Start Event Triggers
_PM.Common.Multiple=Multiple
_PM.Escalations.AddAlertMessage=Add Alert Message
_PM.Variables.FromForm=From form
_PM.Common.No=No
_PM.Toolbar.OpenAndMonitorInNewCanvas=Open and monitor in new canvas
_PM.Scope.Lane=Lane
_PM.Menu.StartTask=Start Task
_PM.NodeDesc.EndCondition=End Condition
_PM.Tabs.ChildProcessWarning=Child Process Warning
_PM.Common.OK=OK
_PM.NodeEventTypes.TimerTrigger=Timer
_PM.Schedule.RelativeDelay=Relative Delay
_PM.Common.ProcessModel=Process Model
_PM.Menu.SelectAll=Select All
_PM.Decision.RequireTheseSpecificNodePaths=Require these specific node path(s) to arrive before executing
_PM.NodeEvents.SendEventInfoEscalation=Starting a process model from an escalation is supported. To do so, configure a receive message trigger on the start node of the target process model and select it here as the message destination.
_PM.Schedule.SkipThisNodeAtTheDateAndTimeSpecifiedByThisExpression=Skip this node at the date and time specified by this expression
_PM.Tabs.FormElementOptions=Form Element Options
_PM.Schedule.TheDateAndTimeSpecifiedByThisExpression=The date and time specified by this expression
_PM.Escalations.EditAlertMessage=Edit Alert Message
_PM.Decision.OneOrMorePathsCanEnterAnXORGateway=1 or more paths can enter an XOR gateway
_PM.Schedule.The=The
_PM.Toolbar.ViewExpertHelp=Use this mode to configure advanced options and publish production-ready process models
_PM.Decision.NoFurtherConfigurationNecessaryForANDGateway=No further configuration necessary for AND gateway.
_PM.Tabs.ViewReadOnly=View Read-Only
_PM.Common.Hidden=Hidden
_PM.Decision.RemoveThisRule=Remove this rule
_PM.Toolbar.MonitorProcessView=Monitor Process View
_PM.Decision.Conditions=Conditions
_PM.Escalations.ThereAreNoEscalationsThatCanBeSkippedOrTriggered=There are no escalations that can be skipped or triggered.
_PM.Tabs.CreateInterface=Create Interface
_PM.Escalations.PleaseSelectForThisEscalation=Please select to \u2019reassign\u2019, \u2019change priority\u2019, or \u2019send notification\u2019 for this escalation.
_PM.Schedule.OnDay=On day
_PM.Menu.ShowMessages=Show Messages
_PM.Escalations.ChangeThePriorityOfThisTask=Change the priority of this task
_PM.NodeEvents.ReceiveMessages=Receive Messages
_PM.Tabs.InlineTaskApprovalDisabled=Inline task approval has been disabled in some of the task forms as they contain a required field.
_PM.NodeEvents.SaveMessageContent=Save Message Content
_PM.NodeDesc.TaskDescription=The name of the task as it appears in an assignee\u2019s task list
_PM.Menu.View=View
_PM.Variables.AddVariable=Add Variable
_PM.Decision.MoveDown=Move Down
_PM.Context.Below=Below
_PM.Menu.Copy=Copy
_PM.Lane.Minimum=Minimum
_PM.Common.ProcessModeler=Process Modeler
_PM.Common.Draft=Draft
_PM.Lane.General=General
_PM.Variables.YouMustSelectAValidTypeForEachProcessVariable=You must select a valid type for each process variable.
_PM.Decision.OneOrMorePathsCanExitAnANDGateway=1 or more paths can exit an AND gateway
_PM.Menu.ResumeTask=Resume Task
_PM.Common.Finish=Finish
_PM.NodeEvents.ChangingTheMessageTypeMappings=Changing the message type will clear all mappings. Are you sure you want to do this?
_PM.NodeDesc.QuickTaskDescription=Make this a Quick Task that can be completed on-demand
_PM.Menu.Setup=Setup
_PM.Schedule.ScheduledDelay=Scheduled Delay
_PM.Context.ViewForm=View Form
_PM.Menu.Lanes=Lanes
_PM.Common.Configure=Configure
_PM.RulesGrid.EnterValueHere=Enter value here
_PM.Variables.ProcessVariables=Process Variables
_PM.RulesGrid.DeleteMapping=Delete Mapping
_PM.Months.April=April
_PM.Common.Email=Email
_PM.General.ProcessModelID=Process Model ID
_PM.NodeEventTypes.LinkProducer=Link Source
_PM.Decision.OneOrMorePathsCanExitAnXORGateway=1 or more paths can exit an XOR gateway, but only ONE gets executed
_PM.Tabs.AddAttachment=Add Attachment
_PM.Months.October=October
_PM.NodeEvents.EventNotSaved=Event Not Saved
_PM.Schedule.Escalate=Escalate
_PM.Schedule.Weekly=Weekly
_PM.NodeEventTypes.MessageTrigger=Receive Message
_PM.Toolbar.SaveProcess=Save Process
_PM.Tabs.LastModified=Last Modified
_PM.Menu.ShowHideNodeStatistics=Show or Hide Node Statistics
_PM.Toolbar.Zoom=Zoom
_PM.Toolbar.Annotation=Annotation
_PM.Common.Yes=Yes
_PM.Schedule.RepeatNode=Repeat Node
_PM.Schedule.Options2nd=2nd
_PM.Months.March=March
_PM.Menu.ZoomIn=Zoom In
_PM.Context.EditSubProcessModel=Edit Sub-Process Model
_PM.NodeEvents.OnceActivatedListenForMessages=Once activated, listen for messages for the life of the process
_PM.Common.Cancel=Cancel
_PM.Tabs.Delete=Delete
_PM.Tabs.Created=Created
_PM.NodeEvents.PersistentID=Persistent ID
_PM.Common.Close=Close
_PM.Timer.ConfigureTimerEvent=Configure Timer Event
_PM.Tabs.Forms=Forms
_PM.Tabs.Exceptions=Exceptions
_PM.Context.Right=Right
_PM.Context.AllEvents=All Events
_PM.Menu.Properties=Properties...
_PM.Tabs.HasAPotentiallyRecursiveRelationship=WARNING\: The sub-process has a potentially recursive relationship inside. It is recommended to fix the sub-process first.
_PM.Schedule.Options1st=1st
_PM.Common.QuickTask=Quick Task
_PM.Tabs.Decision=Decision
_PM.Lane.Pixels=pixels
_PM.Tabs.NewProcessVariable=New Process Variable
_PM.Schedule.DelayUntilTheDateAndTimeSpecifiedByThisExpression=Delay until the date and time specified by this expression
_PM.Schedule.Months=Month(s)
_PM.Tabs.Other=Other
_PM.Menu.PauseProcess=Pause Process
_PM.Escalations.SendAlert=Send Alert
_PM.Scope.Node=Node
_PM.Schedule.AtAnInterval=At an interval
_PM.Schedule.EveryWeekday=Every weekday
_PM.Tabs.Move=Move
_PM.Menu.Open=Open...
_PM.Schedule.HoursSmall=hour(s)
_PM.Tabs.NoMappingsFound=No mappings found
_PM.Tabs.SpawnedNodes=Spawned Nodes
_PM.Tabs.SomeoneElseStartedEditing=Someone Else Started Editing
_PM.Scope.Flow=Flow
_PM.Menu.LaneProperties=Lane Properties
_PM.Scope.Assignees=Assignees
_PM.Schedule.StartingAt=starting at
_PM.Context.EditForm=Edit Form
_PM.Common.Import=Import
_PM.Decision.Condition=Condition
_PM.Tabs.Assignment=Assignment
_PM.Escalations.SelectAtLeastOneUser=Select at least one user, group or role to reassign this task to.
_PM.Escalations.Level=Level
_PM.Menu.CancelTask=Cancel Task
_PM.Decision.ExecuteOnly1OutgoingPath=Execute only 1 outgoing path
_PM.Tabs.HTMLChecker=HTML Checker
_PM.Menu.Cut=Cut
_PM.Menu.OpenParentProcess=Open Parent Process
_PM.Context.ViewSubProcess=View Sub-Process
_PM.Toolbar.OpenProcess=Open Process
_PM.Tabs.QuickTasks=Quick Tasks
_PM.General.LastModifiedOn=Last Modified on
_PM.Toolbar.ChooseLaneOrientation=Choose Lane Orientation
_PM.NodeEvents.MessageRouting=Message Routing
_PM.Menu.Tools=Tools
_PM.Tabs.SaveNew=Save New
_PM.Toolbar.AddHorizontalLane=Add Horizontal Lane
_PM.NodeDesc.EndNodeDescription=If flow reaches this end event, the process will be marked with this end condition.
_PM.NodeDesc.TaskDisplayName=Task Display Name
_PM.NodeEventTypes.RuleTrigger=Rule
_PM.Decision.OneOrMorePathsCanExitAComplexGateway=1 or more paths can exit a Complex gateway
_PM.Menu.SaveAs=Save As...
_PM.General.UnsavedProcessModel=Unsaved Process Model
_PM.Escalations.ChangePriorityTo=Change priority to
_PM.Messages.Warning=warning
_PM.Tabs.EditAnyway=Edit Anyway
_PM.Menu.File=File
_PM.Messages.Error=error
_PM.NodeDesc.InheritParentPriority=Allow child processes to inherit the parent process\u2019 priority.
_PM.Menu.PauseTask=Pause Task
_PM.Menu.Grid=Grid
_PM.General.CreatedOn=Created on
_PM.Toolbar.Print=Print
_PM.RulesGrid.NewMapping=New Mapping
_PM.Messages.Recommendation=recommendation
_PM.RulesGrid.NoProcessVariablesAvailable=No Process Variables Available
_PM.Scope.Variable=Variable
_PM.RulesGrid.NoMappingsConfigured=No mappings configured
_PM.Schedule.NoDelay=No Delay
_PM.Menu.Assignment=Assignment
_PM.Weeks.Tuesday=Tuesday
_PM.Toolbar.ChooseConnectorMode=Choose Connector Mode
_PM.RulesGrid.NoConditionsConfigured=No conditions configured
_PM.Toolbar.ViewSimpleHelp=Use this mode to quickly draft high-level process diagrams
_PM.Weeks.Thursday=Thursday
_PM.NodeDesc.DefaultTaskPriority=Default Task Priority
_PM.Schedule.EverySmall=every
_PM.General.YouMustEnterPMDisplayName=You must enter a valid process display name.
_PM.Common.Delete=Delete
_PM.NodeEvents.SelectTheJMSDestination=Select the JMS Destination
_PM.Escalations.SendMessageEvent=Send Message Event
_PM.Escalations.TheEscalationHasBeenSkipped=The escalation has been skipped.
_PM.Data.NoCustomOutputsHaveBeenConfigured=No Custom Outputs have been configured
_PM.Common.Event=Event
_PM.RulesGrid.MessageProperties=Message Properties
_PM.Decision.IncomingPathsToArriveBeforeExecuting=incoming path(s) to arrive before executing
_PM.Menu.FontPalette=Font Palette
_PM.Menu.OpenProcessModel=Open Process Model
_PM.Tabs.Results=Results
_PM.Context.AddLabel=Add Label
_PM.Schedule.RepeatThisTask=Repeat this task
_PM.Context.Cut=Cut
_PM.Tabs.AddNote=Add Note
_PM.Common.Error=Error
_PM.RulesGrid.ValueMustBeAWholeNumber=Value must be a whole number
_PM.Common.Continue=Continue
_PM.Tabs.ConfigureLane=Configure Lane
_PM.Menu.ZoomOut=Zoom Out
_PM.Lane.Width=Width
_PM.Scope.Process=Process
_PM.Context.DeleteLane=Delete Lane
_PM.Escalations.PriorityLevel=Priority Level
_PM.Menu.ShowGrid=Show Grid
_PM.Menu.Import=Import
_PM.Common.Save=Save
_PM.Toolbar.Connect=Connect
_PM.ValidationError.GuidanceActivityChainedUnattendedMniNode=Unattended nodes configured to run multiple instances (MNI) have incoming activity chaining. Consider redesigning your process to make this MNI activity a bulk or asynchronous operation. Chaining through these nodes can cause a poor user experience or performance issues. Nodes\: {0}.
_PM.Menu.ApplyChanges=Apply Changes
_PM.Schedule.Options4th=4th
_PM.Schedule.Status=Status
_PM.Tabs.Data=Data
_PM.RulesGrid.NewExpression=New Expression
_PM.Tabs.Untitled=Untitled
_PM.Menu.AddVerticalLane=Add Vertical Lane
_PM.NodeEvents.ListenForMessagesOfType=Listen for messages of type
_PM.Toolbar.HideGrid=Hide Grid
_PM.Menu.HideGrid=Hide Grid
_PM.Toolbar.Refresh=Refresh
_PM.Tabs.FolderName=Folder Name
_PM.Tabs.ViewSubProcessModel=View Sub-Process Model
_PM.Scope.Event=Event
_PM.General.ProcessModelUUID=Process Model UUID
_PM.ValidationError.GuidanceTooManyVariables={0} process variables detected. Consider whether process variables should be activity class parameters or split the process into smaller subprocesses. Having more than 100 process variables can complicate maintainability and lead to higher memory consumption.
_PM.Context.Properties=Properties
_PM.Tabs.ImportProcessModel=Import Process Model
_PM.Context.MoveLane=Move Lane
_PM.Menu.Exit=Exit
_PM.General.PublicEventsInstructions=Allows this model to receive messages sent by any user
_PM.Schedule.OptionsLast=Last
_PM.Escalations.TheEscalationHasBeenTriggered=The escalation has been triggered.
_PM.Scope.Parameter=Parameter
_PM.Escalations.ShowAdvancedOptions=Show Advanced Options
_PM.NodeEventTypes.LinkTrigger=Link
_PM.Tabs.Notes=Notes
_PM.Schedule.At=at
_PM.Decision.OneOrMorePathsCanEndInAComplexGateway=1 or more paths can end in a Complex gateway
_PM.Schedule.DelayFor=Delay for
_PM.RulesGrid.OpenTheExpressionEditor=Open the Expression Editor
_PM.NodeEvents.MessageDestinationsInstructions=Note\: Only Events that have been saved will be available in the Picker
_PM.Menu.PrintPreview=Print Preview
_PM.Menu.Print=Print...
_PM.Toolbar.OpenAndEditInNewCanvas=Open and edit in new canvas
_PM.Menu.ShowNodeMetrics=Show Node Metrics
_PM.NodeEvents.EndEvents=End Events
_PM.Tabs.ProcessStartForm=Process Start Form
_PM.Tabs.EditNote=Edit Note
_PM.Schedule.Yearly=Yearly
_PM.Months.June=June
_PM.Escalations.EscalationTimeCannotBeLeftBlank=Escalation time cannot be left blank.
_PM.General.HelpText=On the left you can edit the name and description of this process model. Also enter the process display name, which indicates the name of each process started with this model.
_PM.Schedule.DontStartThisNodeUntil=Don\u2019t start this node until
_PM.General.EmailAttachmentsFolder=Email Attachments Folder
_PM.Tabs.Warning=Warning
_PM.RulesGrid.SelectAProcessVariable=Select a process variable
_PM.Menu.Advanced=Advanced
_PM.Menu.StartProcessfOrDebugging=Start Process for Debugging
_PM.Schedule.RepeatUntil=Repeat until
_PM.Toolbar.ZoomIn=Zoom In
_PM.Schedule.RepeatThisNode=Repeat this node
_PM.NodeEvents.NoEventsConfigured=No events configured
_PM.Tabs.Association=Association
_PM.Months.November=November
_PM.Menu.Edit=Edit
_PM.NodeEvents.SendEventWarningMessage=The option to start a process using the Send Message Event node has been deprecated, and will be removed in a future version of Appian. Use the Start Process smart service instead.
_PM.Menu.Security=Security
_PM.Menu.CloseAll=Close All
_PM.Menu.Delete=Delete
_PM.Toolbar.AddVerticalLane=Add Vertical Lane
_PM.Tabs.Printed=Printed
_PM.Tabs.By=by
_PM.Scope.AdminConfig=Admin Config
_PM.Context.Copy=Copy
_PM.Context.RemoveEscalations=Remove Escalations
_PM.Scope.ProcessModelFolder=Process Model Folder
_PM.Decision.MoveUp=Move Up
_PM.NodeEventTypes.TerminateProducer=Terminate Process
_PM.Months.July=July
_PM.Tabs.Validation=Validation
_PM.Tabs.UnableToGenerateDocumentation=Unable to generate documentation. Please disable your web browser\u2019s pop-up blocker and try again.
_PM.Menu.Redo=Redo
_PM.Menu.Snap=Snap
_PM.Variables.CurrentlyNoProcessVariablesHaveBeenDefined=Currently no process variables have been defined.
_PM.Toolbar.ToggleMessageWindow=Toggle Message Window
_PM.Tabs.Escalations=Escalations
_PM.Menu.RemoveAllLanes=Remove All Lanes
_PM.Data.ThereAreNoResultsToConfigure=There are no results to configure
_PM.NodeEvents.MessageContentInstructions=Add properties for this message
_PM.General.AllowPriorities=Allow priorities of processes and tasks to be changed once started.
_PM.NodeEvents.ActivateMessageEvent=Activate Message Event
_PM.Tabs.Deadlines=Deadlines
_PM.Lane.SpecifyGeneralProperties=Specify general properties for this lane.
_PM.Tabs.Variables=Variables
_PM.Tabs.ActivityExceptions=Activity Exceptions
_PM.Schedule.SkipThisNode=Skip this node
_PM.Toolbar.Mode=Mode
_PM.Context.Instances=Instances
_PM.Scope.ProcessModelImport=Process Model Import
_PM.Context.Paste=Paste
_PM.Context.EnableActivityChaining=Enable Activity Chaining
_PM.RulesGrid.TypeValueHere=Type value here
_PM.Data.SubmissionLocation=Submission Location
_PM.Tabs.PleaseFirstSelectAVersionFromTheList=Please first select a version from the list.
_PM.Schedule.RepeatIndefinitelyOrUntilCancelled=Repeat indefinitely, or until cancelled
_PM.Decision.OneOrMorePathsCanEnterAnORGateway=1 or more paths can enter an OR gateway
_PM.Schedule.AfterTheLastNodeCompletes=after the last node completes
